I have 2 fuselages larking in my loft workshop that will take a T-Rex 600 mechanics, I've decided to start with the Hughes 500MD to see how I get on.

Parts required:

1 x Scale Fuselage.

1 x Second-hand T-Rex 600E

1 x 5.2Ah 22V lipo

1 x 7.4V 3Ah Lipo

1 x UBEC

1 x DJI Naza-H Gyro

1 x DJI OSD, in hand; I'm yet to test it to see if it will work with Naza-H.

1 x FPV camera, I have a choice of 5V or 12V

1 x Flybarless Head

1 x Set of semi-symmetrical 700mm carbon rotor blades, in hand.

1 x EzUHF RX, optional

1 x EzUHF 5.8 VTX.

1 x 2G4 Vtx, optional

Came with the helicopter:

1 x Set of carbon tail rotor blades, binned they are too short and they are chipped.

1 x Set of Maniac 600mm carbon main blades.

1 x 100A ESC came with Helicopter.

3 x Futaba S9252 coreless servos.

1 x Align DS655 tail servo.

3D Printed Parts:

1 x Naza-H housing

1 x EzUHF RX and 7.4V lipo combined housing.