FPV HUB

Other Equipment => Equipment Mods => Topic started by: DaveyLC on February 08, 2013, 03:11:00 PM

Title: Re: FPV spiroNET 13dBi 5.8GHz Patch
Post by: DaveyLC on February 08, 2013, 03:11:00 PM
Heres the inside for those who are interested :)
(http://www.dohc.co.uk/temp/FPV/spironet_patch.JPG)
Title: Re: Re: FPV spiroNET 13dBi 5.8GHz Patch
Post by: keukpa on February 08, 2013, 03:23:03 PM
Woah!

Quick question....

Is that 'it' if so, all we need do is trace the track, buy some PCB board for £5 and make shit loads of these!

Keukpa
Title: Re: Re: FPV spiroNET 13dBi 5.8GHz Patch
Post by: DaveyLC on February 08, 2013, 03:41:38 PM
Pretty much, but thats all microwave patch antennas are really.. Just some cleverly printed double sided  PCB :)

You're paying for the fact its been tested with a network analyzer and the nice and durable packaging :)
Title: Re: Re: FPV spiroNET 13dBi 5.8GHz Patch
Post by: keukpa on February 08, 2013, 03:46:15 PM
nice!

Keukpa
Title: Re: Re: FPV spiroNET 13dBi 5.8GHz Patch
Post by: Teamftp on February 08, 2013, 05:35:12 PM
I feel a new project coming on here at school!!
Title: Re: Re: FPV spiroNET 13dBi 5.8GHz Patch
Post by: keukpa on February 08, 2013, 05:50:36 PM
here too! I have all the equipment to etch that..... just need the 'schematic' ;)

Keukpa
Title: Re: Re: FPV spiroNET 13dBi 5.8GHz Patch
Post by: Dizzy on February 09, 2013, 01:06:54 AM
Quote from: keukpa on February 05, 2013, 01:56:55 PM
You'd need to make sure your head was pointing in the right direction tho! :)

I'd never be able to do that, as soon as a goggle up, I'm all over the place as if I was drunk! lol

Keukpa
keukpa nail one foot to the floor, tie a broom stale across your back and get your spotter on the end,  to turn you to face your plane :D
Oh so naughty dizzy ;D
Title: Re: Re: FPV spiroNET 13dBi 5.8GHz Patch
Post by: Teamftp on February 09, 2013, 07:07:02 AM
Quote from: keukpa on February 08, 2013, 05:50:36 PM
here too! I have all the equipment to etch that..... just need the 'schematic' ;)

Keukpa

Watch this space!! I will get one to you soon...ish!!
Title: Re: Re: FPV spiroNET 13dBi 5.8GHz Patch
Post by: Coyote on February 09, 2013, 01:18:20 PM
Quote from: keukpa on February 08, 2013, 05:50:36 PM
here too! I have all the equipment to etch that..... just need the 'schematic' ;)

Keukpa

Been there, done it, got the T-Shirt last year :)

(http://i108.photobucket.com/albums/n39/cayote64/DSC_0194.jpg)
Title: Re: Re: FPV spiroNET 13dBi 5.8GHz Patch
Post by: keukpa on February 09, 2013, 01:57:57 PM
Quote from: Coyote on February 09, 2013, 01:18:20 PM
Quote from: keukpa on February 08, 2013, 05:50:36 PM
here too! I have all the equipment to etch that..... just need the 'schematic' ;)

Keukpa

Been there, done it, got the T-Shirt last year :)

(http://i108.photobucket.com/albums/n39/cayote64/DSC_0194.jpg)

Fantastic!

How does it work? Just as good?

Fancy sharing the PCB schematic? ;)

Keukpa
Title: Re: Re: FPV spiroNET 13dBi 5.8GHz Patch
Post by: Coyote on February 09, 2013, 02:13:38 PM
I only flew out to 4.2km with it last year, but ran out of land, me flying out over the sea never goes well. Ha perfect picture all the way though

Paul has the schematic, Ill ask him
Title: Re: Re: FPV spiroNET 13dBi 5.8GHz Patch
Post by: Coyote on February 09, 2013, 02:23:01 PM
Looks like this is going to be an DIY patch thread so split the topic
Title: Re: FPV spiroNET 13dBi 5.8GHz Patch
Post by: keukpa on February 09, 2013, 02:32:10 PM
where did it go?lol can't find it!
Title: Re: Re: FPV spiroNET 13dBi 5.8GHz Patch
Post by: Coyote on February 09, 2013, 03:22:49 PM
Your posting in it :)
Title: Re: FPV spiroNET 13dBi 5.8GHz Patch
Post by: keukpa on February 09, 2013, 03:38:48 PM
 :goofy:

hehehee :)

Keukpa