Soon in order.
2 axis BLGC gimbal frame with easily adjustable 2axis + space beetwen frame "depence how low you like to get gimbal".
Parst are made from nylon and carbon sheets,alen screws with bearing on tilt axis.
Gimbal is designed for all GoPro versions - need to adjust CoG on both axis manually "easy thing to do".
Will provide full assembly manual,parts and CUSTOM NADE parts at order "frame holders".
Price - trying to go low as possible "soon will back with informations" ,all depence what matarials used "carbon-fiberglass and tubes - carbon ,alloy"
Engines - still under testing ,but overall desing is for many engines just tube lengs difference.
Soon DLSR cameras gimbals also available.
Still working on my webside ,so not yet fully functional.
If anyone is interested send me PM.
Thanks for looking.
Here is how it looks first prototype with Tarot hexa FY680 frame holders.Soon will add not symetrical design.
(http://img713.imageshack.us/img713/8686/zrzutekranu20130216godz.jpg) (http://img713.imageshack.us/i/zrzutekranu20130216godz.jpg/)
(http://img194.imageshack.us/img194/8686/zrzutekranu20130216godz.jpg) (http://img194.imageshack.us/i/zrzutekranu20130216godz.jpg/)
(http://img14.imageshack.us/img14/8686/zrzutekranu20130216godz.jpg) (http://img14.imageshack.us/i/zrzutekranu20130216godz.jpg/)
(http://img688.imageshack.us/img688/8686/zrzutekranu20130216godz.jpg) (http://img688.imageshack.us/i/zrzutekranu20130216godz.jpg/)
(http://img13.imageshack.us/img13/8686/zrzutekranu20130216godz.jpg) (http://img13.imageshack.us/i/zrzutekranu20130216godz.jpg/)
Here is one arm prototype design.
(http://img10.imageshack.us/img10/8686/zrzutekranu20130216godz.jpg) (http://img10.imageshack.us/i/zrzutekranu20130216godz.jpg/)
(http://img22.imageshack.us/img22/8686/zrzutekranu20130216godz.jpg) (http://img22.imageshack.us/i/zrzutekranu20130216godz.jpg/)
(http://img853.imageshack.us/img853/8686/zrzutekranu20130216godz.jpg) (http://img853.imageshack.us/i/zrzutekranu20130216godz.jpg/)
(http://img853.imageshack.us/img853/6789/zrzutekranu20130216godza.jpg) (http://img853.imageshack.us/i/zrzutekranu20130216godza.jpg/)
Looks great Marcin, what prices are they looking like ?
Still counting costs ,but not much.Trying to go low as possible.
Need more time ,will back with all info etc:. ;)
Such a talent Marcin. Good luck with this venture mate!
Just one arm with gopro on it.
This one should be light.
(http://img202.imageshack.us/img202/3672/zrzutekranu20130216godz.png) (http://img202.imageshack.us/i/zrzutekranu20130216godz.png/)
(http://img40.imageshack.us/img40/3672/zrzutekranu20130216godz.png) (http://img40.imageshack.us/i/zrzutekranu20130216godz.png/)
Here is simple flat face forward gimbal mount "still under design".Need testing.
All measurement ,screws and plates can be done at custom order.
(http://img835.imageshack.us/img835/1750/zrzutekranu20130217godz.png) (http://img835.imageshack.us/i/zrzutekranu20130217godz.png/)
(http://img29.imageshack.us/img29/1750/zrzutekranu20130217godz.png) (http://img29.imageshack.us/i/zrzutekranu20130217godz.png/)
Quick tour around :)
OAOMT BLC (http://www.youtube.com/watch?v=Nh8cMtysPmY#ws)
Controller holder option
(http://imageshack.us/a/img405/2273/zrzutekranu20130218godz.jpg)
first cut try.
(http://img9.imageshack.us/img9/377/img5962ec.jpg) (http://img9.imageshack.us/i/img5962ec.jpg/)
Right after couple tests on gimbal arm I manage to do this part for testing purpose.
(http://img213.imageshack.us/img213/1320/img5963w.jpg) (http://img213.imageshack.us/i/img5963w.jpg/)
(http://img28.imageshack.us/img28/1893/img5964x.jpg) (http://img28.imageshack.us/i/img5964x.jpg/)
(http://img545.imageshack.us/img545/1995/img5965sb.jpg) (http://img545.imageshack.us/i/img5965sb.jpg/)
Someones beat you to it Marcin :)
http://www.rcgroups.com/forums/showpost.php?p=24185834&postcount=62 (http://www.rcgroups.com/forums/showpost.php?p=24185834&postcount=62)
mine will be cheaper !...
Prototype in plastic
(http://img687.imageshack.us/img687/509/img5967x.jpg) (http://img687.imageshack.us/i/img5967x.jpg/)
(http://img46.imageshack.us/img46/229/img5968c.jpg) (http://img46.imageshack.us/i/img5968c.jpg/)
(http://img507.imageshack.us/img507/7885/img5966c.jpg) (http://img507.imageshack.us/i/img5966c.jpg/)
(http://img407.imageshack.us/img407/8473/img5970d.jpg) (http://img407.imageshack.us/i/img5970d.jpg/)
(http://img109.imageshack.us/img109/9901/img5969n.jpg) (http://img109.imageshack.us/i/img5969n.jpg/)
Looking good Marcin
Im watching this with major interest looks ideal for my hex 550hex
How much you looking at for a completed kit marcin
Cheers Ginnerfpv
Quote from: ginnerfpv on February 21, 2013, 05:57:13 PM
Im watching this with major interest looks ideal for my hex 550hex
How much you looking at for a completed kit marcin
Cheers Ginnerfpv
Snap!!! I'm keen to hear more on the cost too.
STILL UNDER CONSTRUCTION 2 WEEKS
;D
UNDER CONSTRUCTION (http://www.youtube.com/watch?v=VzdnOvlNmhw#)
Lol it is good to watch but so slow and noisey sweet marcin ;)
dizzy :)
Looking great Marcin :)
One of the options, this one is prototype and still need to be tested.
(http://img29.imageshack.us/img29/1348/img6452j.jpg) (http://img29.imageshack.us/i/img6452j.jpg/)
Whas the overall weight there Marcin?
for now 150gr ,but those engines are good for cameras like NEX5 not tiny gopro ,engines I will use weight half of these used on picture and gimbal will be lighter a lot.
Also is still under construction so it will be changed a lot :)
controller back safety cage ,front will be different with acces to all connections etc:.
(http://img694.imageshack.us/img694/599/img6457l.jpg) (http://img694.imageshack.us/i/img6457l.jpg/)
First tests really promising.
Magi V1 frame.
Will do some mirror video asap I got sun inside my flat.
(http://img713.imageshack.us/img713/8434/img6458p.jpg) (http://img713.imageshack.us/i/img6458p.jpg/)
(http://img716.imageshack.us/img716/7296/img6459r.jpg) (http://img716.imageshack.us/i/img6459r.jpg/)
(http://img42.imageshack.us/img42/3636/img6462a.jpg) (http://img42.imageshack.us/i/img6462a.jpg/)
(http://img713.imageshack.us/img713/792/img6463i.jpg) (http://img713.imageshack.us/i/img6463i.jpg/)
Sorry for MDU as it's working bit better on that place.Need to draw some nice plate for that.
Very nice Marcin, looks very good :)
Looking very good in deed Marcin :)
Short test video of Magi V1 ,this is without any setup yet.
Sorry for poor lightning and crap picture ,this is my Gopro I.
MAGI V1 BLC 1st test. (http://www.youtube.com/watch?v=K2J9LNHn8VU#ws)
Bloody well done Marcin!!! Very impressed, let me know the retail details ;)
That`s bloody good, hardly needs any tuning at all !
Very well done marcin your a star in my eyes brillient effort ;D
dizzy
Right iv followed this thread with major interest
And so far the only question i have
Is when is a unit ready for purchase
Engine
Gimbals
Board
Complete unit
I know it only a protatype but this kit works and they way you have cnced the parts out and the rewinding of the engines a pat pending would be easily obtained
I WANT ONE! !!!!!
In the words of peter Jones
IM IN! !!!!!¦
IM holding off buying a gimbel now all the Gimbals on the market this one looks to work and kick arse
Quote from: ginnerfpv on March 03, 2013, 09:22:39 AM
In the words of peter Jones
IM IN! !!!!!¦
IM holding off buying a gimbel now all the Gimbals on the market this one looks to work and kick arse
Yep, I totally agree. Typically, I had bought myself a gimbal whilst I was off. I should have held off for another couple of months!!
Quote from: ROVguy on March 03, 2013, 11:15:21 AM
Quote from: ginnerfpv on March 03, 2013, 09:22:39 AM
In the words of peter Jones
IM IN! !!!!!¦
IM holding off buying a gimbel now all the Gimbals on the market this one looks to work and kick arse
Yep, I totally agree. Typically, I had bought myself a gimbal whilst I was off. I should have held off for another couple of months!! Lol whilst i been making one from scratch for the entire christmas period lol i should have waited too :-X
dizzy :)
2467 test 2 (http://www.youtube.com/watch?v=UkqID6H2tZY#)
Bang on matey!!! Nice cheesy grin too!!! ;) lol
Nice one bud, your dog thinks you are mad, you should strap it to him/her. :laugh:
working great bud.
:) G
Excellent first rate job marcin :D
dizzy :)
First try on Hexa.
Magi V1 hexa test (http://www.youtube.com/watch?v=b-bV-JMHOw4#)
Looks spot on :)
Looks bang on matey!!! Nice job!!!
Here is almost finished version Magi V1 ,still misisng some bits but it's almost done.
Working great !
(http://img35.imageshack.us/img35/1527/img6480eb.jpg) (http://img35.imageshack.us/i/img6480eb.jpg/)
(http://img594.imageshack.us/img594/1007/img6481xr.jpg) (http://img594.imageshack.us/i/img6481xr.jpg/)
(http://img688.imageshack.us/img688/1640/img6482q.jpg) (http://img688.imageshack.us/i/img6482q.jpg/)
(http://img832.imageshack.us/img832/4030/img6483w.jpg) (http://img832.imageshack.us/i/img6483w.jpg/)
Very nice Marcin :)
I would flip the controller around so the vulnerable pins and connectors face forward and are protected by the gimbals frame
Sometimes amazes me what you guys on this forum can do. Awesome work marcin.
Looking great Marcin, well don bud.
;) G
(http://img46.imageshack.us/img46/6522/img6484p.jpg) (http://img46.imageshack.us/i/img6484p.jpg/)
(http://img818.imageshack.us/img818/2946/img6486k.jpg) (http://img818.imageshack.us/i/img6486k.jpg/)
Am I strange for finding milled aluminium kinda sexy :o :o
That looks awesome Marcin!!!
that's how it's working with new holders almost finished.
Magi V1 test 2 ,almost finished :) finally got proper sunny day to make it better footage. (http://www.youtube.com/watch?v=bBEpZ152mOg#)
Superb ! :)
:thumbsup:
Absolutely excellent. Sign me up for one Marcin when you get chance!
Spot on marcin lovely work all round :D
dizzy :)
First frame is ready to be delivered to Dizzy ;D
(http://img96.imageshack.us/img96/2170/img6516ut.jpg) (http://img96.imageshack.us/i/img6516ut.jpg/)
Marcin your a star its looking excellent, looking forward to fitting this on the hex, not so sure about the software bit yet though :+
happy dizzy :D
Thats a work of art, very well done.
Maiden hexa and maiden air gimbal test is here at None FPV videos !
What controller have you been using marcin? It looks great I have to say. Is there any way to mount a GoPro in a case onto the gimbal?
sorry Tomeparker but this is desing to fit GP 1 or 2 without case.Still can have lens protection in front fitted.Can use gopro case lens cover screw to carbon frame part.
Well its still cool, nice and compact.
What was the controller you are using to work the gimbal?
(http://img4.imageshack.us/img4/5848/img6526mp.jpg) (http://img4.imageshack.us/i/img6526mp.jpg/)
Any updates on this, or have I missed some posts?
Peter
check classified
Hi Marcin,
"check classified"
Nothing.......?????
Peter
Looks like he got out of the wrong side of the bed today :)
I think he meant : http://www.fpvhub.com/index.php/topic,12520.msg106896.html#msg106896 (http://www.fpvhub.com/index.php/topic,12520.msg106896.html#msg106896)
No, I didn't get out bed the wrong side, in fact I was quite enjoying today, until I got this. The last post was March 18th and I was asking if there was any further information. I was told to check classified and couldn't find anything.
I think he meant : http://www.fpvhub.com/index.php/topic,12520.msg106896.html#msg106896 (http://www.fpvhub.com/index.php/topic,12520.msg106896.html#msg106896) Does that refer to me or Marcin?
The gimbal looked very good and before buying from elsewhere, decided to give a forum member a chance.
Peter
No I meant did Marcin get out the wrong side of bed with the short reply rafter
"Apology" accepted, are we still friends ? :)
Lol :)
Yup I didn't see your reply, so the reply was supposed to read that I think Marcin meant http://www.fpvhub.com/index.php/topic,12520.msg106896.html#msg106896 (http://www.fpvhub.com/index.php/topic,12520.msg106896.html#msg106896) not classified's section
;D sorry ...