Cost to build around 50£ :P
Arms 2mm alloy
Plates - 2.4mm Epoxy fiberglass pressed
Allen screws + alloy treaded standoffs
Expected setup :.
Brushless gimbal with NEX 5 or GH2 :-\
Motors - multistar 4822 390kv x 6 = ;D
Propellers - Carbon 14x5 :-X
Lipos 4S 10.000mAh or 1 x 5000mAh or 5S same capacity.
Controller NAZA + GPS :santa:
ESC's - turnigy plush 25Amps
Here is frame without landing gear and strenght test with 2kg x 10 = ;D
(http://img849.imageshack.us/img849/8315/img6585d.jpg) (http://img849.imageshack.us/i/img6585d.jpg/)
(http://img259.imageshack.us/img259/8462/img6589f.jpg) (http://img259.imageshack.us/i/img6589f.jpg/)
(http://img515.imageshack.us/img515/2099/img6583r.jpg) (http://img515.imageshack.us/i/img6583r.jpg/)
(http://img17.imageshack.us/img17/6716/img6587eg.jpg) (http://img17.imageshack.us/i/img6587eg.jpg/)
(http://img20.imageshack.us/img20/1113/img6586aj.jpg) (http://img20.imageshack.us/i/img6586aj.jpg/)
(http://img822.imageshack.us/img822/1535/img6588u.jpg) (http://img822.imageshack.us/i/img6588u.jpg/)
Blooming hell thats impressive :D very strong chassis pretty bullit proof too by that picture
dizzy
Where did you get a Naza for £50?? :D
Steve :'( frame build cost 50£.
Now that does look strong...
How about making it so you can fold it .. looks like it would be fun getting it in and out of car
Richard
No worry got 7seater... ;D ,can't be folding just don't like it...prefere one strong frame.
That`s really surprising how strong that is, I thought initially it didn't look very strong at all in all honesty
Question do I need 3CW and 3CCW props for Y6 or no ?
Planning to get those :.
http://www.hobbyking.com/hobbyking/store/uh_viewitem.asp?idproduct=24278 (http://www.hobbyking.com/hobbyking/store/uh_viewitem.asp?idproduct=24278)
and what means R ? in this one ?
http://www.hobbyking.com/hobbyking/store/uh_viewitem.asp?idproduct=24279 (http://www.hobbyking.com/hobbyking/store/uh_viewitem.asp?idproduct=24279)
OK R means = right rotation !
Frame got legs...just need 15mm standoffs ,on picture are 30mm fitted..bit wide ,but that's how it will look like.
(http://img69.imageshack.us/img69/4622/img6595f.jpg) (http://img69.imageshack.us/i/img6595f.jpg/)
Nice frame Marcin.
Yes 3x CW and 3x CCW
All three on top go CW and all three underneath go CCW, or visa versa.
Some put smaller props on the top because of the reduced efficiency.
My Y6 has the same top and bottom though, never got round to testing the theory.
Sent from my HTC HD2
Sound of these x 6 ;D
(http://img46.imageshack.us/img46/5420/img6600ic.jpg) (http://img46.imageshack.us/i/img6600ic.jpg/)
Ooooo, that's a trip to A+E just waiting to happen :o
Best got arms done..compare to my 680 size HEXA :-X
(http://img823.imageshack.us/img823/9935/img6607w.jpg) (http://img823.imageshack.us/i/img6607w.jpg/)
impressive Marcin, when will it be ready to fly? ;D
This is so impressive full body armour required methinks ;D
dizzy ;)
That`s a mighty big beast Marcin :)
Quote from: Coyote on May 27, 2013, 01:34:12 AM
That`s a mighty big beast Marcin :)
I,m sure i have said that in the past too coyote :D but not to marcin ;)
Waiting for parts etc:. I'm going slowly with my imagination.
This is how it will look on legs.
There are missing parts in that render ,but all it's measured etc:.
For is all I can do as HK and others China shops killing my project and I have to play waiting game with them ,but thing is good as I got time to improve and catch all bugs...I hope.
(http://img4.imageshack.us/img4/7052/s2y.png) (http://img4.imageshack.us/i/s2y.png/)
after some hours I manage to design battery holders ,also change some things in design and catch another 3 bugs !!...that thing takes time ,but it will fly with class... :laugh:
these blue blocks imitate 6S 5000 mAh Lipos x 2 !!!
(http://img823.imageshack.us/img823/6793/doe.png) (http://img823.imageshack.us/i/doe.png/)
That is a bloody monster :o
Just keep your arms, legs, animals and small children away from it :D
more work done.
redesign top cage,engine YAW mount almost finished.
(http://img849.imageshack.us/img849/5846/83v.png) (http://img849.imageshack.us/i/83v.png/)
(http://img819.imageshack.us/img819/6741/99v8.png) (http://img819.imageshack.us/i/99v8.png/)
(http://img89.imageshack.us/img89/2034/ejy8.png) (http://img89.imageshack.us/i/ejy8.png/)
(http://img7.imageshack.us/img7/8135/o3i.png) (http://img7.imageshack.us/i/o3i.png/)
Wow looking good ..
So what's the new build cost ?
Looks awesome m8 :)
Jim.
Quote from: Faffer on June 20, 2013, 09:10:05 PM
Wow looking good ..
So what's the new build cost ?
I stop counting long time ago... :'( :laugh:
starts working on DSLR or nex gimbal ..
ahh ohh that camera at bottom is exact NEX5 size ;D so can compare to baby.
(http://img560.imageshack.us/img560/8211/2r2.png) (http://img560.imageshack.us/i/2r2.png/)
that gives me headache :)
(http://img407.imageshack.us/img407/6071/xj3.png) (http://img407.imageshack.us/i/xj3.png/)
Quote from: marcin on June 21, 2013, 03:02:19 PM
that gives me headache :)
(http://img407.imageshack.us/img407/6071/xj3.png) (http://img407.imageshack.us/i/xj3.png/)
where did you get a naza schematic then marcin :P
yeah, fixing that will be a bit of a nightmare - wouldn't be keen on hanging the legs/gimbal on a single C ring.
top parts are real now.
(http://img585.imageshack.us/img585/6946/wrn1.jpg) (http://img585.imageshack.us/i/wrn1.jpg/)
just realise I could have couple nice planks for that thing :-X
almost all parts are done ,now waiting game for China etc:.
Still can't assemble whole frame as I 'm missing middle plates with dampers ,can't cut them too ...no clue what size dampers need to fit them in plates.
but going slowly forward.
(http://img585.imageshack.us/img585/2350/svo9.jpg) (http://img585.imageshack.us/i/svo9.jpg/)
Looking good be nice to see it flying ..
try to assembly parts ,but missing standoffs etc:.
it starts looking like something I was drawing on computer :laugh:
(http://img195.imageshack.us/img195/7643/u466.jpg) (http://img195.imageshack.us/i/u466.jpg/)
Marcin looking good just a can of matt black spray paint, from helfords and she will look the bee,s knee,s ;D
dizzy ;)
some shoots of next parts ... :D
(http://img62.imageshack.us/img62/84/6ey.png) (http://img62.imageshack.us/i/6ey.png/)
(http://img827.imageshack.us/img827/6269/7wg.png) (http://img827.imageshack.us/i/7wg.png/)
and more parts alive...
(http://img694.imageshack.us/img694/4408/rfmt.jpg) (http://img694.imageshack.us/i/rfmt.jpg/)
lots of bits and pieces there marcin you building a squadron really on the quiet :D
dizzy ;)
Marcin looking good .. but you have had a day now and new bits I want to see more ...!!!!!!!
Hope you are on with add more bits and getting it ready
starts assembly that b.....h.
3rd axis is fully working 360 degree :)
now wiring time etc:. engines should be here this week :)
still wating for 17" props and lipos but 2 weeks max.
(http://img62.imageshack.us/img62/7224/bn2z.jpg) (http://img62.imageshack.us/i/bn2z.jpg/)
(http://img836.imageshack.us/img836/6195/trd3.jpg) (http://img836.imageshack.us/i/trd3.jpg/)
OH my thats looking a sweet build marcin one heck of a plateform in the making for sure :D
Well done on your design that defo the cats whiskers, what sort of weight is she coming out at at the moment marcin shes going to need some real power to lift her ;)
dizzy :)
Nex gimbal arms ready ..
(http://img14.imageshack.us/img14/6599/2i0v.jpg) (http://img14.imageshack.us/i/2i0v.jpg/)
(http://img163.imageshack.us/img163/696/j85e.jpg) (http://img163.imageshack.us/i/j85e.jpg/)
Nice Marcin :)
Now thats really nice!
and fitted at bottom.
(http://img833.imageshack.us/img833/175/8d3z.jpg) (http://img833.imageshack.us/i/8d3z.jpg/)
(http://img836.imageshack.us/img836/1653/4qcf.jpg) (http://img836.imageshack.us/i/4qcf.jpg/)
I just spied the Orange RX :D wait until the Spektrum haters see that ;D
£7 RX on a £700 airframe :D
Quote from: DaveyLC on July 17, 2013, 07:43:41 PM
I just spied the Orange RX :D wait until the Spektrum haters see that ;D
£7 RX on a £700 airframe :D
this is for camera man to operate gimbal only ,I don't like him ... :laugh: wtf...why you did not record this awesome footage ..You $%^*#*@ k.
Sorry man there was something wrong with control.
Bullshit....!!
;D
Ah that makes sense :D
that thing looks scary :-X
(http://img62.imageshack.us/img62/3792/luc8.jpg) (http://img62.imageshack.us/i/luc8.jpg/)
THE BEAST ;D
just love it marcin :D
dizzy :)
Can't wait to see it fly, great job.
Sent from my HTC One using Tapatalk 2
wired.
(http://img708.imageshack.us/img708/1774/2e89.jpg) (http://img708.imageshack.us/i/2e89.jpg/)
looks well aggressive :)
Very nice .. Need to see this fly and your next task ..
Paint that wall......
You put the gimbal on backwards Marcin :)
first yaw test ,sorry have to cut video as I got speed follow me mode setup and now discover this settings -they are just brilliant.
yaw test (http://www.youtube.com/watch?v=pI9BfU1x5JE#ws)
New improved frame ,eliminate all desing and building bugs.
Maiden asap I assembly legs for it.
and here is how you do this PRO :laugh:
(http://img547.imageshack.us/img547/7021/laed.jpg) (http://img547.imageshack.us/i/laed.jpg/)
OK ready for maiden ,will go without gimbal give her some hard life ...testing testing then gimbal time ;D
(http://img41.imageshack.us/img41/5031/9fdv.jpg) (http://img41.imageshack.us/i/9fdv.jpg/)
(http://img405.imageshack.us/img405/7262/hsn2.jpg) (http://img405.imageshack.us/i/hsn2.jpg/)
(http://img834.imageshack.us/img834/6392/w5g2.jpg) (http://img834.imageshack.us/i/w5g2.jpg/)
(http://img46.imageshack.us/img46/6986/bzzb.jpg) (http://img46.imageshack.us/i/bzzb.jpg/)
15minutes flight time fully loaded.
;D
now thats impressive!
very nice Marcin
Very well done marcin i suspect your delighted at all aspects now all your hard work as been worth it, you will soon be reaping the rewards :D
dizzy :)
she evolve ,did couple improvements in build after crash ,which will help to avoid destroying electronics etc:.
also she got nice new front arms.
(http://img5.imageshack.us/img5/322/wsfo.jpg) (http://img5.imageshack.us/i/wsfo.jpg/)
The amount of strain on those centre "bends" in the arms must be amazing .. are you sure it'll hold?
I walk on them.Don't worry :)
No will go more pro look "black :laugh:" and add. some improvements.
That thing can handle any camera up to 1.5kg ,maximum 2kg TESTED ! still having nice flying characteristics.
http://youtu.be/JXHXX9C1te4 (http://youtu.be/JXHXX9C1te4)