meet my new quad
(http://s21.postimg.org/5npj493k3/DSCF1177.jpg) (http://postimg.org/image/5npj493k3/)
(http://s23.postimg.org/qyc2bjb6f/DSCF1178.jpg) (http://postimg.org/image/qyc2bjb6f/)
(http://s22.postimg.org/fbntg1ff1/DSCF1179.jpg) (http://postimg.org/image/fbntg1ff1/)
thought that i would have a go at a dead cat style frame
pleased with the results now i need to learn how to set the kk2 board
flys great in stablised mode but is a handfull in manual mode need to dial the settings down a bit
weather looks good for tomorrow will give it a go
oooo... Looks good... Nice... Was this your own design?
Very nice Stef :)
hi
yes this is my own design there are some points that i will need to sort out but on the whole its worked out well
It looks like you have further developed the ov3rquad frame...
i had never seen that frame based this on the team blacksheep quad design
had to ditch the kk2 board it was doing some strange things and whatever i did it would not fly outside in breezy conditions just kept shutting the motors down
it shut down at 10ft and broke two of the motor mounts
now changed to a kk 5.5e red controller and made new arms seems to be a bit happier now
will have to wait for the weather to improve to test it out
Im still waiting for my free one to test, you know you love me
Looks good, what was the kk2 doing? Like oscillating? I had a similar problem
the kk2 seemed to be working ok but as soon as the copter hit a bit of turbalnce the motors (all 4)would stop and it would fall out of the sky
whatever i tried it made no difference after it broke two of the motor mounts i decided to put a std red kk board now works ok
stefan