Print Page - Mini Skywalker #2

Title: Mini Skywalker #2
Post by: rob.thomson on January 01, 2014, 05:41:48 PM

Starred my new mini Skywalker today.

(http://img.tapatalk.com/d/14/01/02/da8usuhe.jpg)

(http://img.tapatalk.com/d/14/01/02/atypegaz.jpg)

(http://img.tapatalk.com/d/14/01/02/azese3yq.jpg)

Mounted the tx module on the back.

The camera is a 700tvl Sony, on a pan servo.

Tracker will be a skylark att modem.

OSD will be a Cyclops Breeze.

Just need to get the rest of by he bits soldered up and ready to use.

I really like the mini Skywalker. Super portable, and flies exceptionally well.

Sent from my GT-I9300 using Tapatalk

Title: Re: Mini Skywalker #2
Post by: rob.thomson on January 01, 2014, 09:09:28 PM

GPS installed...

I love silicon for these jobs.

Secure enough to hold it tight. Easy enough to remove if work required!

(http://img.tapatalk.com/d/14/01/02/hehymebu.jpg)

Sent from my GT-I9300 using Tapatalk

Title: Re: Mini Skywalker #2
Post by: rob.thomson on January 03, 2014, 07:22:58 PM

Spent a few hours this pm getting all the wiring done.

Great news. No filter needed. It all works great :)

Last bits to do now are to install the push rods, and to check the GPS tracking works.

Should be airborne soon .

Sent from my GT-I9300 using Tapatalk

Title: Re: Mini Skywalker #2
Post by: Coyote on January 03, 2014, 07:43:34 PM

Its looking good Rob :)

Title: Re: Mini Skywalker #2
Post by: rob.thomson on January 03, 2014, 07:59:00 PM

Thanks.

Learnt a fee lessons on the first one about how to save space!

I look to be able to fit a 2200mah pack in this version! But will provably stick to 1100. Less weight helps :)

Rob

Sent from my GT-I9300 using Tapatalk

FPV HUB

Members => Build Threads => Topic started by: rob.thomson on January 01, 2014, 05:41:48 PM