I stripped down my x-5 - that flew like a dog.
And after giving some thought - have hacked in this.
(http://img.tapatalk.com/d/14/05/07/u2ugu6us.jpg)
Its a bit crude - but then idea is to put a whole lot of fin way back!
Who knows... It may work. If it does - I will beautify it!
Sent from my GT-I9300 using Tapatalk
Yes.
Big ply plate on the bottom with a carbon rod.
Sent from my GT-I9300 using Tapatalk
Interesting. Dont see why you need those braces though?
I did something similar on my Flyingwings Falcon as shown Here (http://www.fpvhub.com/index.php/topic,14568.msg123172.html#msg123172).
In that case I glued a bit of ply at right angle to the fin booms with cyano, which prob does the same job as the bracing?
Will be interesting to see how it goes anyway!
regards
Andy
Only because its temporary.
I only had some 2mm carbon rod at hand - so did that brace as a short term so I can test :)
Sent from my GT-I9300 using Tapatalk
Quote from: skyscraper on May 07, 2014, 06:31:30 PM
I did something similar on my Flyingwings Falcon as shown Here (http://www.fpvhub.com/index.php/topic,14568.msg123172.html#msg123172).
Has Rob at Flying Wings contacted you after Saturday about incorporating your design into the production model?
Quote from: rob.thomson on May 07, 2014, 06:32:45 PM
Only because its temporary.
I only had some 2mm carbon rod at hand - so did that brace as a short term so I can test :)
Sent from my GT-I9300 using Tapatalk
I get my carbon tube Here (http://www.woolmer.co.uk/) . Can pick some up as I go by next week if you like ?
regards
Andy
Quote from: iPeel on May 07, 2014, 06:36:25 PM
Quote from: skyscraper on May 07, 2014, 06:31:30 PM
I did something similar on my Flyingwings Falcon as shown Here (http://www.fpvhub.com/index.php/topic,14568.msg123172.html#msg123172).
Has Rob at Flying Wings contacted you after Saturday about incorporating your design into the production model?
Not Yet. Why was he interested to use it? Would be happy if he wants to use it as an option. Would certainly be nice to try that fin arrangement without my diagonal spar mod ( which added too much washout), perhaps with a laminated wing.
regards
Andy
Tell you what...
Having flown Skyscrapers falcon. If I could buy one - I would!
Quote from: skyscraper on May 07, 2014, 06:45:37 PM
Not Yet. Why was he interested to use it? Would be happy if he wants to use it as an option. Would certainly be nice to try that fin arrangement without my diagonal spar mod ( which added too much washout), perhaps with a laminated wing.
Sorry mate, just winding you up. It was funny to see you half apologetically explain what you'd done to your Falcon as if he was going to have a go at you!
Quote from: iPeel on May 07, 2014, 07:07:49 PM
Quote from: skyscraper on May 07, 2014, 06:45:37 PM
Not Yet. Why was he interested to use it? Would be happy if he wants to use it as an option. Would certainly be nice to try that fin arrangement without my diagonal spar mod ( which added too much washout), perhaps with a laminated wing.
Sorry mate, just winding you up. It was funny to see you half apologetically explain what you'd done to your Falcon as if he was going to have a go at you!
Oh .. Fell for that what a Dickhead I am :laugh:
regards
Andy
Quote from: rob.thomson on May 07, 2014, 06:54:02 PM
Tell you what...
Having flown Skyscrapers falcon. If I could buy one - I would!
Cheers for the compliment Rob . Maybe I should get around to doing some 3D printed parts for it :)
I think there are 2 things good about it. The diagonal spar makes control much crisper than the usual you get with foamies and the hub ( described here (http://www.fpvhub.com/index.php/topic,14568.msg125913.html#msg125913) ) gives very crisp video.
So far also its been very reliable.
regards
Andy
Getting an X-5 to fly right is like trying to stop a Wag from Pouting.. You can use all the tape and glue you like but you know underneath she'll still look like a goldfish.
Probably true!
Probably also why it is just sitting in the shelf at the moment - one day I will get the next bit done.
Sent from my GT-I9300 using Tapatalk