What's missing
haha yes still waiting for it lol contacted them today, they say its been in the uk since the 30th of april,, so where is it now
Quote from: aitch on May 17, 2014, 04:03:18 PM
Camera ????
Pfft camera is for noobs. Real FPVers read through the static signal just like in the matrix.
Bren,
boxed up a couple of cams for you but still in my glove compartment ready to post because the good weather made me fly all day ;D
Sorry but will post on Monday :+
These are both 38mm single board cams so might be a little wider than your mount in that pic.... nothing glue won't sort!
you will need 3 pin mini molex picoblade type leads as i had none spare!
(http://i.stack.imgur.com/L2BETl.png)
Regards,
GD
thanks matey ill get one ordered
You may want to try some of these. I have ordered and received but not yet tried.
http://www.ebay.co.uk/itm/20-SETS-Micro-JST-1-25-3-Pin-Male-Female-Connector-plug-with-Wires-Cables-/230922777987?pt=UK_ToysGames_RadioControlled_JN&hash=item35c411f583 (http://www.ebay.co.uk/itm/20-SETS-Micro-JST-1-25-3-Pin-Male-Female-Connector-plug-with-Wires-Cables-/230922777987?pt=UK_ToysGames_RadioControlled_JN&hash=item35c411f583)
W
not hong kong again lol you dont want to sell a couple do you ;D ?
subarubren,
PM me with your address and I'll post you 2 x male and 2 x female connectors next week. No charge.
W
Thanks for that wiggles ;D ... I'm plain out here! there's 2 cams both with different 3 pin molex but which ever one you send will fit at least one of them.
Be aware that the pin configuration may not be what is required by the camera. I have already fallen foul of this and burnt a camera because a step up power board had the positive and the signal wire in the wrong orientation. They are easy to change around. Lift the locking tab with a scalpel and pull the pin out. I would suggest you check connections before plugging in. Will post your connectors next week and let you know when done. W
Looking good Bren :)
Whats keeping that lipo in BTW ?
I would also at this point recommend some reinforced fibre tape on the bottom of it
I haven't fixed it yet it was just for the photo, what do you recommend
Velcro on both the pod and battery, then secured with a velcro strap to stop slipping.
Tape : Packing tap (http://www.ebay.co.uk/itm/1-x-ROLL-50mm-x-50m-Crossweave-Reinforced-Tape-/180337800157?pt=UK_Packaging_Materials&hash=item29fcf873dd)
Ordered :D