Print Page - Futaba T7c would not hold a charge.

Title: Futaba T7c would not hold a charge.
Post by: Tim Chambers on June 25, 2014, 06:33:01 PM

I wonder why? :+
https://www.dropbox.com/s/spzdn99da166m43/IMAG0358.jpg (https://www.dropbox.com/s/spzdn99da166m43/IMAG0358.jpg)

Title: Re: Futaba T7c would not hold a charge.
Post by: g4uvz on June 25, 2014, 11:37:41 PM

Not unusual when the Nicad battery suffers black wire syndrome.

You may get away with cleaning with Glass Fibre pen and then applying conformal solution.
Adrian

Title: Re: Futaba T7c would not hold a charge.
Post by: Tim Chambers on June 26, 2014, 01:28:07 AM

Hi Adrian
Glassfibre pen hmm, I'll just look that up on Amazon, of course I will need a new battery as well. They don't make em like they used to the battery in my Macgregor A series is 37 years old and still holds a good charge, this Futaba is on it's third battery.

Title: Re: Futaba T7c would not hold a charge.
Post by: drambuidhe on July 14, 2014, 11:59:22 PM

Hi, I use the same model and the battery packed up awhile back.
I now use a 1300mah 3s lipo velcroed on the back and she's as good as new. Any spare 3s would do , especially an old one past its best for flight :)

FPV HUB

Radio Equipment => 2.4Ghz 35Mhz => Topic started by: Tim Chambers on June 25, 2014, 06:33:01 PM