FPV HUB

Members => Build Threads => Topic started by: marcin on October 11, 2014, 03:26:01 PM

Title: Marcin mini QAV250 copy
Post by: marcin on October 11, 2014, 03:26:01 PM
For now I manage to make that.
These are 6" carbon props with DYS engines ,which are really nice !
Still not sure to get acro naze32 or full naze32 ?
Lipo 3S nano tech 1.3Ah
rc frsky 2.4Ghz

for now all what's on pictures is 240gr   is that bad ,good or average ?
BTW - that yellow G10 wil be replaced with 2mm black G10 and bottom nylon standoffs with same as top ones but short 10mm.

(http://s22.postimg.org/8k5yn0zct/P1120671.jpg) (http://postimg.org/image/8k5yn0zct/)

(http://s22.postimg.org/5nec90459/P1120672.jpg) (http://postimg.org/image/5nec90459/)

(http://s22.postimg.org/s0qo9jugt/P1120673.jpg) (http://postimg.org/image/s0qo9jugt/)

(http://s22.postimg.org/644596ha5/P1120674.jpg) (http://postimg.org/image/644596ha5/)
Title: Re: Marcin mini QAV250 copy
Post by: Coyote on October 12, 2014, 01:26:55 PM
Looking good mate :) Acro will do you, but I do miss a baro on mine to keep its height properly
Title: Re: Marcin mini QAV250 copy
Post by: marcin on October 13, 2014, 03:29:45 PM
finally i get acro ,think I will just keep this one to fly around LOS and learn myself ,keep practice etc:.
+ mystery 12amp esc's with DYS motors and these carbon 6" props. on 3s that quad might be fast .. ;D


Title: Re: Marcin mini QAV250 copy
Post by: marcin on November 01, 2014, 08:47:39 PM
finish and all up weight with
DYS motors
12amp mystery ESC's
6" carbon props
1.3Ah 3S nanotech
naze32
frsky 2.4 RC
FPV gear wdr600 + 600mW immersion + voltage reg.

479gr     :D

that thing just got initial hover in saloon and I must admit ,that thing will be FAST ! sound is awesome.

Title: Re: Marcin mini QAV250 copy
Post by: marcin on November 02, 2014, 12:01:00 PM

(http://s27.postimg.org/rgjv7v31b/P1120734.jpg) (http://postimg.org/image/rgjv7v31b/)

(http://s27.postimg.org/jqd32q0pr/P1120735.jpg) (http://postimg.org/image/jqd32q0pr/)

(http://s27.postimg.org/eqfmurv33/P1120736.jpg) (http://postimg.org/image/eqfmurv33/)
Title: Re: Marcin mini QAV250 copy
Post by: Pidge on January 31, 2015, 06:44:46 PM
Need to pull some weight out of my build...

200g - Tarot 250
5.7g - CC3D FCB
32g - 12A Mystery SimonK Flashed ESCs
101g - HD Sony FPV Camera
72g - DYS 2300KV Motors
9g - Spektrum AR610 Receiver
129g -  Turnigy Nano 11.1v 1500mAh
25g - TS58200 FPV Transmitter

573.7g - Total

Think I need the plastic cased FPV camera and use a smaller battery. What sort of flight time are you getting?
Title: Re: Marcin mini QAV250 copy
Post by: marcin on January 31, 2015, 09:35:39 PM
mini slowmotion. (http://www.youtube.com/watch?v=fvpdye5G1c8#ws)
Title: Re: Marcin mini QAV250 copy
Post by: marcin on January 31, 2015, 09:37:45 PM
Pidge you use heavy hd camera and 1.5Ah lipo so weight is not that bad consider that.
I got 7min or bit more but not to much.
Title: Re: Marcin mini QAV250 copy
Post by: Pidge on January 31, 2015, 10:12:17 PM
Thanks for that, thought it would be the camera and battery.