hi guys
so, i have a t8j that i have hooked up to ezuhf 4ch rx for a wing project.
channels1 & 2 for elevons, ch3 for throttle and ch4 i'd like to use as a switch for the apm autopilot.
i have a 14sg tranny that is easy to re-assign channels and switches, but i want to use the t8j for the ezuhf models and i'm struggling on how to do this
is there an easy way to re-assign the rudder channel as a switch? or do i have to program some kind of mix? if so, can anyone help as it's beyond me at the moment!!!
cheers in advance for any help/insight
d
PS
If you haven't got it - here's a Link to the 8J Manual:
http://manuals.hobbico.com/fut/8j-manual.pdf (http://manuals.hobbico.com/fut/8j-manual.pdf)
I've had a quick glance at it and it appears you may not be able to do what you want to:
For Channels 5 to 8 you can do what you want in the Aux-Ch Menu feature.
For Channels 1 to 4 - see Page 91 of Manual - Tx Setting.
hi
i've read the manual and i dont think i can do what i'd like to.
simple solution was to transfer my ezuhf across to my 14sg. i can do what i want to on that .....
thanks for your help anyway. i did email futaba support so it'll be interesting to see what they come back with.