just few pics of my modded radian i have now shifted the vtx to the tail moving the weight back further as it was very nose heavy.i aslo burnt a away alot of foam in the fuse to enable to lipo to beshifted further back therefore placing a 1/4 of lipo ove the cog works like a treat ..also i strenthend the saddle with my top tip tape and also the tail aswell..
(http://s2.postimage.org/2qhatv1k4/IMAG0329.jpg) (http://postimage.org/image/2qhatv1k4/)
(http://s2.postimage.org/2qhchee1w/IMAG0330.jpg) (http://postimage.org/image/2qhchee1w/)
(http://s2.postimage.org/2qhe4xqjo/IMAG0331.jpg) (http://postimage.org/image/2qhe4xqjo/)
Nice going Mark, looks good matey :)
That means alot cheers ian... :)
Be carefull with overheating the vtx if its encased at the bottom though
I could channel a air scupe or something to help it only sits just below the top of the fuse...
Hi mark, speaking from my experience with my easystar, it would be wise to channel some sort of scope past it , i tried to fit mine in on its side on my easystar, i cut a slot out to seat it in about half way, but only after twenty mins on test outside in a fair wind i found it was getting very hot.
So mines fitted on a ply base on top the tail now just gets warm to touch now :D
btw antenna looks brill :D
dizzy