Stumbled across this today and thought it was worth sharing:
12/5v configurable and filtered.
(http://www.dronematters.com/media/catalog/product/cache/1/image/650x/0821a2670168b1741e2cf98b3d565fcc/i/m/img_0632.jpg)
http://www.dronematters.com/index.php/atas-mini-power-distribution-board-pro.html (http://www.dronematters.com/index.php/atas-mini-power-distribution-board-pro.html)
Manual: http://www.dronematters.com/index.php/amfile/file/download/file_id/9/ (http://www.dronematters.com/index.php/amfile/file/download/file_id/9/)
Nice piece of kit ! I have back ordered one to try out :)
Looks very good... i just haven't got the inclination to dig my existing PDB out and replace it right now :)
what about this one??
http://quadrevo.com/index.php?route=product/product&product_id=56 (http://quadrevo.com/index.php?route=product/product&product_id=56)
built in OSD for an extra $2 .... awesome ;)
winner winner chicken dinner
That looks brilliant. I for one can't wait to buy a Chinese knock off for $7.
#honesty
he he
Pre-ordered one, looks great, keeps everything neat, go on then :)
wonder if they will kindly send me one free for the plug lol :D
Friend of mine got sent one and did a little over view.
ATAS Power Distribution Board v2 (http://www.youtube.com/watch?v=JEPVZnSmGoE#ws)
OK more money to spend !
That thing looks awesome piece of PCB for mini's IMO
why stick it in a mini..... i'd probably use that in just about anything lol!
Quote from: Coyote on January 29, 2015, 01:42:59 PM
Pre-ordered one, looks great, keeps everything neat, go on then :)
Side note, I meant I pre-ordered the OSD version
It looks good, but I am not entirely convinced that the 12 V regulator (which looks like a linear regulator to me) will provide 600 mA at 12V out from a 6S pack. That would mean (25 V-12 V) == 13 V voltage drop and heat disipated in the littel reg would be 13 V * 0.6 A = 8 Watts. Would prob be fine on 4S though, but would be worth testing to see how hot it gets, especially if going to more cells.
Hey I could be wrong but there just dont seem to be enough components on there for two switching regulators..
regards
Andy
QuoteQuotePre-ordered one, looks great, keeps everything neat, go on then (http://www.fpvhub.com/Smileys/SoLoSMiLeYS1/smiley.gif)
Side note, I meant I pre-ordered the OSD version
Just had n email ... te OSD version is NSTC only .. no PAL
Had the same email last night. Shame :(
Ahhhhhhh damn
What does it matter? Unless you are using an actual TV NTSC is fine.
QuoteStumbled across this today and thought it was worth sharing:
12/5v configurable and filtered.
(http://www.dronematters.com/media/catalog/product/cache/1/image/650x/0821a2670168b1741e2cf98b3d565fcc/i/m/img_0632.jpg)
http://www.dronematters.com/index.php/atas-mini-power-distribution-board-pro.html (http://www.dronematters.com/index.php/atas-mini-power-distribution-board-pro.html)
Manual: http://www.dronematters.com/index.php/amfile/file/download/file_id/9/ (http://www.dronematters.com/index.php/amfile/file/download/file_id/9/)
In stock and ordered :D
The OSD version arrived yesterday, doesn't look anywhere near as good quality as the atas board or as well thought out as such - but i'm sure it does the job.....
Now which one to fit in the defiance 250 mini?
Quote from: Gundummy on January 31, 2015, 09:29:47 AM
QuoteQuotePre-ordered one, looks great, keeps everything neat, go on then (http://www.fpvhub.com/Smileys/SoLoSMiLeYS1/smiley.gif)
Side note, I meant I pre-ordered the OSD version
Just had n email ... te OSD version is NSTC only .. no PAL
update pal version ready for pre order might grab one
Heres a closer look:
(http://i21.photobucket.com/albums/b287/ukbeast/fun/20150226_160046_zps3ztqlvaf.jpg)
Its a shame that the + & - connections are on the left and right sides of the board and have to be soldered onto a rail. (no dedicated holes in the PCB) or am i being picky? The fat capacitor on top and protruding pins may cause some installation issues for some set ups.
Thoughts?
im liking it tbh I think its a well thought out product not many pdb boards out there with intergrated osd please correct me if im wrong..
if you decide its not for you please give me first dibs
The integrated OSD is brill ... its having to stretch the + and - ESC cables to each side of the board thats the pain lol.... I'll let you know Mark ;)
oki doki, im about to click pre order on this tomoz ill be very interested to see your findings on the wire routing etc
the capacitor isn't shown on the diagram on the site
I'm going to also assume that its a 12v cam and vtx output? No details at all!!
ITworks volts out itself
Not overly impressed with the SMD work on it, looks messy.
Bang goes using it under a Naze with that massive capacitor now in the way, your going to need some size spacer to clear it.
ok pre ordered the pal version stock arrives 2 march