It will carry 2 or 3 axis GoPro gimbal, for now it's 1021gr weight with 3Ah 4S LiPo.
FC is full naze baro mag gps mwosd (burned eachine mini cam- never read it's 5V not 12V) 200mW 5.8 TS5823
6x4.5 props with 2100kv 2306 racer motors x 6 :-X on 4S 60C :sparta:
(http://s13.postimg.org/ij91inj2r/IMAG1391_1.jpg) (http://postimg.org/image/ij91inj2r/)
(http://s13.postimg.org/w2pvocx1v/IMAG1392_1.jpg) (http://postimg.org/image/w2pvocx1v/)
(http://s14.postimg.org/nlqa2cny5/IMAG1393_1.jpg) (http://postimg.org/image/nlqa2cny5/)
That thing is very cute, with all those motors in such a small space it should really shift !
I quite like do DIY, but just realise after powering up I messed up motor directions properly. ;D
I was using NAZA V1 V2 WKM, notice that NAZE32 is different setting up motors direction :wallbash:
After assembling whole thing and wiring up, 3 of my motors spin wrong direction.
I use RCtimer X drone ESC's with BLHELI having no luck connecting them with PC so no BLHELI suite software for me to change direction :fool:
But can't wait to try that thing , got some proper power to weight ratio even carry gopro with gimbal, at last something different in small size to fly with.
Look at all that snow ! :)
It flies :) Hard to tell how well, you need to do a few circuits :)
https://youtu.be/YmNeEcdtZgU
more photo, she fly really lovely.
Tempted to get tarot ZYX-M for her :)
(http://s9.postimg.org/mz12b39gr/P1240836.jpg) (http://postimg.org/image/mz12b39gr/)
(http://s9.postimg.org/6cji20giz/P1240837.jpg) (http://postimg.org/image/6cji20giz/)
(http://s9.postimg.org/4ywgkg6nf/P1240838.jpg) (http://postimg.org/image/4ywgkg6nf/)
(http://s9.postimg.org/pmv3z6rvv/P1240839.jpg) (http://postimg.org/image/pmv3z6rvv/)
(http://s9.postimg.org/ys3gt1vaj/P1240840.jpg) (http://postimg.org/image/ys3gt1vaj/)
(http://s9.postimg.org/chflt2y0b/P1240841.jpg) (http://postimg.org/image/chflt2y0b/)