Jon at TWS has put together some interesting review vids, I'd thought I'd do a thread for him to post them on here
The ones here are a selection of what he has done so far and the last one is of my micro quad which I couldn't be arsed to do so gave to him to build for me and video at the same time
He's looking for more subs so if you like maybe you could subscribe to his channel, he's always open to suggestions as well, so if you fancy anything bulit or reviewed he'd prob get it, withing reason of course
! No longer available (http://www.youtube.com/watch?v=UbvCXDcn5Ro#)
! No longer available (http://www.youtube.com/watch?v=C1OskOEX5GA&t=5s#)
! No longer available (http://www.youtube.com/watch?v=pJp4kUP5iuM#)
! No longer available (http://www.youtube.com/watch?v=c0WDR0mAUIk#)
! No longer available (http://www.youtube.com/watch?v=bWmG5MprHYM&t=1s#)
! No longer available (http://www.youtube.com/watch?v=qebEECPGEFc#)
! No longer available (http://www.youtube.com/watch?v=x52ze25lH_E#)
! No longer available (http://www.youtube.com/watch?v=0KjUiZdPrmc#)
! No longer available (http://www.youtube.com/watch?v=MUQG2pl-O2M#)
! No longer available (http://www.youtube.com/watch?v=qFFcWPNuKPk#)
And enjoy
! No longer available (http://www.youtube.com/watch?v=bWmG5MprHYM&t=1s#)
! No longer available (http://www.youtube.com/watch?v=qebEECPGEFc#)
! No longer available (http://www.youtube.com/watch?v=x52ze25lH_E#)
! No longer available (http://www.youtube.com/watch?v=0KjUiZdPrmc#)
! No longer available (http://www.youtube.com/watch?v=qFFcWPNuKPk#)
I will have a look, thanks Simon :)
Thanks Simon.......I'll prepare to be judged......
I hope they enjoy.
No advertising popping up all the time either.......
Like em. And the humour....
Do you live your entire life in front of a cam? Must spend hours doing this!
+1 subscriber here... and not just because you name-checked me :)
Quote from: Shikra on December 09, 2016, 06:05:29 PM
Like em. And the humour....
Do you live your entire life in front of a cam? Must spend hours doing this!
Hours in my house mate, comes down in his dinner break and stays 2 hours
That's the council for you 😉
New vid from Team Woolly sheep front man
http://youtu.be/qF7TANseNbQ (http://youtu.be/qF7TANseNbQ)
Cheers
Edit:3000th post, Yeah Baby 👍
Quote from: Shikra on December 09, 2016, 06:05:29 PM
Like em. And the humour....
Do you live your entire life in front of a cam? Must spend hours doing this!
Me or Simon?
I try to do one a week......I seem to be filming everything these days
Quote from: bignose13 on December 09, 2016, 06:49:35 PM
Hours in my house mate, comes down in his dinner break and stays 2 hours
That's the council for you 😉
FFS don't tell everybody......I clock off for lunch.....
I am always up on my hours..... :laugh:
Quote from: CurryKitten on December 09, 2016, 06:09:26 PM
+1 subscriber here... and not just because you name-checked me :)
Thanks
I am your No.1 fan....
http://youtu.be/vHFQcLy7owE (http://youtu.be/vHFQcLy7owE)
http://youtu.be/lXJ05EtzSrg (http://youtu.be/lXJ05EtzSrg)
http://youtu.be/k2ZEp_hRKbw (http://youtu.be/k2ZEp_hRKbw)
http://youtu.be/ZUOyjPRCYUo (http://youtu.be/ZUOyjPRCYUo)
http://youtu.be/WSDZogpjcLQ (http://youtu.be/WSDZogpjcLQ)
http://youtu.be/gjo0bsBSt9s (http://youtu.be/gjo0bsBSt9s)
http://youtu.be/nHERodhYHCg (http://youtu.be/nHERodhYHCg)
http://youtu.be/4I9q33I4Qwc (http://youtu.be/4I9q33I4Qwc)
http://youtu.be/Zx1VMZcY8-E (http://youtu.be/Zx1VMZcY8-E)
http://youtu.be/qMNtecsHAeY (http://youtu.be/qMNtecsHAeY)
http://youtu.be/1FDreamHLn0 (http://youtu.be/1FDreamHLn0)
For the price you really can't knock the budget option.
Quote from: Coyote on January 15, 2017, 11:07:35 PM
For the price you really can't knock the budget option.
I'm well impressed Ian, worked just as good as the original puck as seen in vid
Good review guys. Especially as I bought a clone puck... shouldn't have sold mine so cheap!
http://youtu.be/R1n_gvaBsGQ (http://youtu.be/R1n_gvaBsGQ)
good review thanks, been looking at these my self.. :gotit:
Quote from: Shikra on January 16, 2017, 06:10:41 PM
Good review guys. Especially as I bought a clone puck... shouldn't have sold mine so cheap!
Shikra....Did you like the comment in the video about who is the brains behind Bignose 13....lol
next video is OSD with your old NAZA...... waiting to do a video in the new minim OSD
http://youtu.be/308jGZHeCXc (http://youtu.be/308jGZHeCXc)
http://youtu.be/YOZP4YlNEi8 (http://youtu.be/YOZP4YlNEi8)
http://youtu.be/3uMOYZrA13g (http://youtu.be/3uMOYZrA13g)
just for fun...
http://youtu.be/_UwV6q6-YS8 (http://youtu.be/_UwV6q6-YS8)
the little wing looks good fun.
G
It is Gord, needs a bit of sorting but when done flies like it's on rails,
When the welsh meet is sorted I'll mail or ring you mate to sort lifts etc
Cheers
Quote from: bignose13 on February 20, 2017, 05:42:57 PM
It is Gord, needs a bit of sorting but when done flies like it's on rails,
When the welsh meet is sorted I'll mail or ring you mate to sort lifts etc
Cheers
sounds good, thanks
http://youtu.be/usejJ1EPpfY (http://youtu.be/usejJ1EPpfY)
http://youtu.be/kRcwYwzihZU (http://youtu.be/kRcwYwzihZU)
http://youtu.be/BmFJjVq1TrI (http://youtu.be/BmFJjVq1TrI)
I have the 3d printed version of the case here to try out soon, the protective lens though I don't have so I've ordered a couple cheers :)
http://youtu.be/20hO1tDC5TQ (http://youtu.be/20hO1tDC5TQ)
Video 1
http://youtu.be/RcyKY_V5S2w (http://youtu.be/RcyKY_V5S2w)
Video 2
http://youtu.be/kf5NoeSwJ6A (http://youtu.be/kf5NoeSwJ6A)
Video 3
http://youtu.be/bCVxsAtTq9g (http://youtu.be/bCVxsAtTq9g)
Video 4
http://youtu.be/XOTjpwU3trw (http://youtu.be/XOTjpwU3trw)
Video 5
http://youtu.be/8tzWyn9wrNs (http://youtu.be/8tzWyn9wrNs)
It would be nice if in each post you wrote a sentence or 2 about what is going on the video.
Quote from: DerbyshireDrones on March 06, 2017, 02:51:02 AM
It would be nice if in each post you wrote a sentence or 2 about what is going on the video.
I thought the video title said it all but I take your point and will place comments. As there was 5 in one go I was just relieved to get them finished. On Youtube channel text it it does explain in the comments section.
A new X-frame from TWS called The 'Hogget"
This is an insight into my build.....enjoy!
http://youtu.be/jEzywOQR81w (http://youtu.be/jEzywOQR81w)
Give your FrSky Taranis a facelift with this new Carbon Fibre Hydro Dipped case.
While you are at it do the antenna and speaker mod.
http://youtu.be/awsvTicujyU (http://youtu.be/awsvTicujyU)
Testing the Loc8tor tag locating system
http://youtu.be/-TOu2QAg8NM (http://youtu.be/-TOu2QAg8NM)
What actually is a hall sensor gimbal?
http://youtu.be/T_YxZoyXH1U (http://youtu.be/T_YxZoyXH1U)
Installing the FrSky M9 Hall Sensor Gimbals to my Taranis
http://youtu.be/-t3gzmYLDMk (http://youtu.be/-t3gzmYLDMk)
A new offering from FrSky.
The NEW Taranis Q X7 transmitter. Why would you want one?
Let me tell you why you want one......
http://youtu.be/WpjtkwM2gjI (http://youtu.be/WpjtkwM2gjI)
What battery option are you using?
Cheers
P
Quote from: SnoozeDoggyDog on April 15, 2017, 07:52:49 PM
What battery option are you using?
Cheers
P
I am currently using AA batteries. However I have 3S 1000mA batteries spare so I have made an adapter to convert the load plug to 2S balance plug ready for when my AA batteries need changing
Taranis Q7X need updating to get D8 protocol enabled to work with my D4R-II PPM receivers
http://youtu.be/t3paELh4ZSY (http://youtu.be/t3paELh4ZSY)
Quote from: ASBO on April 16, 2017, 01:50:11 AM
I am currently using AA batteries. However I have 3S 1000mA batteries spare so I have made an adapter to convert the load plug to 2S balance plug ready for when my AA batteries need changing
Thanks
P
What he really needs....Is one of these....lol
(https://s2.postimg.org/h2xjp2d2d/TM_1.jpg) (https://postimg.org/image/h2xjp2d2d/)
(https://s2.postimg.org/ezn4hed9h/TM_2.jpg) (https://postimg.org/image/ezn4hed9h/)
:vulture:
Quote from: English Turbines on April 16, 2017, 10:46:28 PM
What he really needs....Is one of these....lol
(https://s2.postimg.org/h2xjp2d2d/TM_1.jpg) (https://postimg.org/image/h2xjp2d2d/)
(https://s2.postimg.org/ezn4hed9h/TM_2.jpg) (https://postimg.org/image/ezn4hed9h/)
:vulture:
You are not wrong.......watch my next video......I am not a happy Chappy......lol
Sharing model data between Taranis X9D & Q X7?........really?
http://youtu.be/27MRcrTL__Q (http://youtu.be/27MRcrTL__Q)
Quote from: English Turbines on April 16, 2017, 10:46:28 PM
What he really needs....Is one of these....lol
(https://s2.postimg.org/h2xjp2d2d/TM_1.jpg) (https://postimg.org/image/h2xjp2d2d/)
(https://s2.postimg.org/ezn4hed9h/TM_2.jpg) (https://postimg.org/image/ezn4hed9h/)
:vulture:
Looks nice in white.....I may look for an old X9D+ and upgrade it with gimbals and a white case.
I do like the carbon look mind......better in the flesh
Quote from: ASBO on April 17, 2017, 12:03:14 AM
Looks nice in white.....I may look for an old X9D+ and upgrade it with gimbals and a white case.
I do like the carbon look mind......better in the flesh
Hi there,
Lol...I can recommend the gloss white, the photos dont do it justice really. It looks amazing in the daylight finished in this colour with the carbon accents on the switches. I spray painted it with Plasti Kote enamel....it's pretty good stuff
You will need a clean case and 3 coats to ensure coverage all over.
:vulture:
Quote from: ASBO on April 16, 2017, 11:59:54 PM
Sharing model data between Taranis X9D & Q X7?........really?
http://youtu.be/27MRcrTL__Q (http://youtu.be/27MRcrTL__Q)
Hi there,
When you selected the Model you wanted to copy, you didn't press select to drop the Asterix next to it..?...So I dont think it copied the data, only the file name?
Cant you simply copy the files from one disc onto another on a PC?
Hope that helps..... :vulture:
BINGO
There is a procedure of 6 steps.
Simple when you know how.....
http://youtu.be/_UCAuLC8AN8 (http://youtu.be/_UCAuLC8AN8)
Quote from: English Turbines on April 17, 2017, 12:43:30 AM
Hi there,
When you selected the Model you wanted to copy, you didn't press select to drop the Asterix next to it..?...So I dont think it copied the data, only the file name?
Cant you simply copy the files from one disc onto another on a PC?
Hope that helps..... :vulture:
That was the first thing I tried as seems logical......however, it doesn't work.
You can only back up models then copy the backup files. The model data is integrated into the radio software.
In the first video I tried to restore the backup models to the new radio but error message stated they were incompatible.
I am happy to report that I have nailed it and just posted a new video stating how to do it.
Ah, good video m8, file conversion inside Companion...Thats going to help a lot of folk who thought they could do it with just the Radio set alone...Good work.
How full is your Swear Box now..?...lol.
:vulture:
Quote from: English Turbines on April 17, 2017, 08:55:51 PM
Ah, good video m8, file conversion inside Companion...Thats going to help a lot of folk who thought they could do it with just the Radio set alone...Good work.
How full is your Swear Box now..?...lol.
:vulture:
lol......it was acting.....
I have just done these pair on the Aeromax OSD
I was really impressed with this OSD and will be using a few for sure........
INTRODUCTION & PROGRAMMING
http://youtu.be/t6wVTb8c678 (http://youtu.be/t6wVTb8c678)
This one is a bit crazy
INSTALLING THE AEROMAX
http://youtu.be/JkpVpBGoX7k (http://youtu.be/JkpVpBGoX7k)
Love it!. And not just because it's aeromax :)
Skywalker X6 build video
http://youtu.be/V7NrYdGgFYk (http://youtu.be/V7NrYdGgFYk)
AR Wing Build Video
http://youtu.be/XooOZU7YABI (http://youtu.be/XooOZU7YABI)
Red Arrow Hawk Maiden
http://youtu.be/et-9IFpdg2A (http://youtu.be/et-9IFpdg2A)
Got an opportunity to maiden my new wings
AR Wing & Skywalker X6
http://youtu.be/wHyB_PFUfYk (http://youtu.be/wHyB_PFUfYk)
Flying a scratch built Depron 1100mm Avro Vulcan FPV and my mate with his FMS Hawk.
Also includes a bit of a rant...... just a few points regarding TWS & TBS confusion
http://youtu.be/l7BpcQtc3L8 (http://youtu.be/l7BpcQtc3L8)
Good point about the confusion of the sheep mate
Glad you cleared it up, I was getting black and woolly mixed up......FS
Ah good old Ali Shanmao :) Very opinionated ( subject to who's paying him more normally ) but whose word carries little weight after a few very controversial statements he made in the past hurt his already damaged reputation.
Wasn't it statements relating to Isis Ian ?? Seem to remember something like that, could be wrong, I normally am
Shame we didn't see the X6 fly.....but the videos are always amusing.....:)
I flogged my X6 for £40, its more than I paid for it, but wish I had kept it now..
:vulture:
Didnt know that. Dunno why but I just find him annoying. but I annoy myself so that means nothing.
Quote from: bignose13 on December 17, 2017, 09:54:09 PM
Wasn't it statements relating to Isis Ian ?? Seem to remember something like that, could be wrong, I normally am
And brill funy vid as always ASBO.
Love that Vulcan.
Quote from: bignose13 on December 17, 2017, 09:54:09 PM
Wasn't it statements relating to Isis Ian ?? Seem to remember something like that, could be wrong, I normally am
Yeah some Jihad comments that set off a shit storm ( obviously).
The guy is an arrogant cock-end. I know it's his religion but I had a serious problem with him going on about how much he wanted a second wife, not content with the current mother of his children. ANyway, his religion is dog shit.
oh he must be a tit. One is too much for me... two is just asking for trouble...
sorry dizz....