Text only | Text with Images

FPV HUB

Radio Equipment => UHF Systems => Topic started by: Andy Sayle on October 29, 2019, 02:21:16 PM

Title: EZUHF Upstat
Post by: Andy Sayle on October 29, 2019, 02:21:16 PM
Hi folks,

I don;'t suppose anyone has any information on the "Upstat" option within the EZUHF setup software?  It can be selected to be output as one of the slots in a PPM stream.  I have used RSSI and LINK before, I get those, but I can't find any info on what infor UPSTAT contains, nor what format the data is output in.

Cheers
Andy
Title: Re: EZUHF Upstat
Post by: Coyote on October 29, 2019, 02:36:45 PM
Its for providing the OSD with the link details, unidirectional only though.
Title: Re: EZUHF Upstat
Post by: Andy Sayle on October 29, 2019, 03:26:21 PM
Do you know what info is passed along though, and what format it is in?  I'm hoping it will provide RSSI info for each of the two antenna on the 8CH rx?
Title: Re: EZUHF Upstat
Post by: Coyote on October 30, 2019, 02:08:41 PM
Uplink Status (UPSTAT)
All uplink status is available in the single-cable PPM stream for use by supported OSDs. The XuGong v2/Pro, or the upcoming XuGong Vortex both take advantage of this method to show critical uplink status on-screen.
The received signal strength (RSSI) of each of the receiver's antennas, along with the link quality, are captured by the OSD, and displayed with appropriate alarms to indicate marginal conditions.
Text only | Text with Images