Text only | Text with Images

FPV HUB

Planes => Autopilots => Feiyu Tech => Topic started by: Skipper Billy on June 28, 2012, 04:02:09 PM

Title: FY31 and Elevon question
Post by: Skipper Billy on June 28, 2012, 04:02:09 PM
I have installed my radio gear on a  wing and used the Elevon function to get the corrcet mix for Aileron and Elevator.

All works fine.

I am about to install my FY31AP - and I have learned about the no. 3 dip switch to select Elevons on the Fy31.

Question is - do I take the mix out of my transmitter and go back to Elevator and Aileron and leave mixing to the FY31 or leave it as is ???

Title: Re: FY31 and Elevon question
Post by: Coyote on June 28, 2012, 04:03:16 PM
Yes you take the mix out of the radio
Title: Re: FY31 and Elevon question
Post by: Skipper Billy on June 28, 2012, 05:49:33 PM
Many thanks.
Title: Re: FY31 and Elevon question
Post by: electricmick on June 28, 2012, 05:52:56 PM
The reason being that the FY31 has a RTH function so needs to control the plane if/when the transmitter signal is lost. Therefore the elevon mixing has to be done on the plane not in the transmitter.
Text only | Text with Images