all the uhf i have seen all work with futaba are there any units out there that work along side jr through the port at there rear
:o :o
Hi Ginner
Most manufacturers chose to develop with Futaba. I think this was personal preference.
As far as i'm aware all the systems can be made to work with JR/Spektrum. It's just a matter of constructing a lead. You just need the wiring diagram for ppm, gnd etc...If you look you will find info on the UHF of your choice.
Heres one for EZUHF
Connect EzUHF to Spektrum Dx6, Dx7, or Dx8 (http://www.youtube.com/watch?v=gk46N8RKd2c#ws)
Hope this is helpful
Thanks
DrZ
Be cafeful doing this mate -my dx8 really didn't play well with my ezuhf!!! Nor do a lot of other people's! Tried on x2 different dx8's both crap for UHF! The ezuhf has been designed to work with Futaba, the 3.5mm plugs aren't good enough to work well. Other makes may work with JR & Spektrum, but dunno.
Please read: http://www.fpvhub.com/index.php/topic,7590 (http://www.fpvhub.com/index.php/topic,7590)
Dunno about JR but can't be that much different spektrum, read post 14.
As for the video NEVER TURN ON A EZUHF WITHOUT AN ANTENNA!! It'll kill it, even says so on the unit!!
I bought a Futaba 9c off the bmfa classifieds cheap for ezuhf use - much much better!! There are some on eBay now.
If you buy one, this might be helpful:
http://www.fpvhub.com/index.php/topic,7716.0.html (http://www.fpvhub.com/index.php/topic,7716.0.html)
Cheers lads
I think flyn idea is the best get another tranny for use with uhf
Don't fancy re wiring my Jr tranny lol