Text only | Text with Images

FPV HUB

Radio Equipment => 2.4Ghz 35Mhz => Topic started by: Flyn on December 13, 2012, 06:45:22 PM

Title: Futaba 9C Antenna Bung From Maplins
Post by: Flyn on December 13, 2012, 06:45:22 PM
Anyone with UHF or 2.4ghz on their Futaba 9C will know that the 35mhz antenna leaves a hole once removed.

Pop down to Maplins & grab a bag of these:


(http://s11.postimage.org/6dglawc9r/IMG_0312.jpg) (http://postimage.org/image/6dglawc9r/)

They can be a little loose but either some self amalgamating tape will work to keep it in, or just leave as is because you have a bag full.
Title: Re: Futaba 9C Antenna Bung From Maplins
Post by: Coyote on December 13, 2012, 06:52:48 PM
Good tip :)
Title: Re: Futaba 9C Antenna Bung From Maplins
Post by: Flyn on December 13, 2012, 08:08:26 PM
Cheers bud, one of my mates at the flying club put me onto it. Looks pretty good too.
Title: Re: Futaba 9C Antenna Bung From Maplins
Post by: Skipper Billy on December 13, 2012, 09:18:44 PM
@Flyn   Does the aerial simply unscrew or does it need disconnecting inside the tx first? (Dont want to break it!)
Title: Re: Futaba 9C Antenna Bung From Maplins
Post by: Flyn on December 13, 2012, 09:31:46 PM
Mine just unscrewed mate, I'd assume yours would too.
Title: Re: Futaba 9C Antenna Bung From Maplins
Post by: Thecoltster on December 17, 2012, 03:44:23 AM
Nice one...another good reason for me to get the ezuhf gear!
Text only | Text with Images