fy31ap surface movments and gps question

[liambaker996]

hi guys, i have setup my fy31ap when placing the fy into stabilization mode and tilting the plane about there is hardly any movement at all of the control surfaces and i cant understand why?
also i am using a suppo osd is it possible to use the gps from the suppo for both osd and fy and how do i go about doing so ?
Thanks
Liam

[Coyote]

The control surfaces will move the further you take each gain dial away from 12 o'clock position. Then you dial more or less in depending on how much you need. If the control surface is reacting the wrong way and you turned the dial clockwise from the 12 o'clock then you need to turn it anti-clockwise from 12 o'clock instead.