hi my gyro doesn't work in my elevator channel?

[MCPF1]

hi my e-sky ek2-0704 is't working in my elevator channel but works in my aileron channel. All it does when plugged into elevator (ch2) is flash and never stop. what am i doing wrong? :'(

[mattydred]

is the trim on your aileron channel in the middle? i would think it is and it isnt on the elevator which is why i thinks its not arming.

[MCPF1]

i will quickly try

[MCPF1]

nope still isn't working

[Coyote]

Not initialising normally means the models not steady when its turned on, trims arnt neutral or a dud gyro

[MCPF1]

all trims are neutral and the gyro works fine when plugged into aileron and elevator works fine when not plugged into the gyro.

[Coyote]

Are your alieron and elevator servos different brands ?

[MCPF1]

yes but i didn't realise that would make a difference.

[Coyote]

It shouldn`t normally, but you say it works on one but not another so i figured the only varible could be servo brand. Same rx, same gyro, different servo.

I`d swap the servo, or try the gyro plugged into evlator, but a different servo plugged into the gyro`s output

[MCPF1]

thanks i have swapped them and they are now working

[Coyote]

Cool, nice 1 :)