Daisy Star

[FPVSteve]

Daisy:


Pod:



Platform:
--------------
Easy Star v1
12" Ailerons
2650kv motor
6x4E Sport Prop
40A ESC
2200mAh 3 cell battery
2.4GHz AR500 + Spektrum DX5e

FPV System
------------------
5.8GHz 100mw video (omnis, but got CP's coming from 3DJIM)
$16 Hobby King Sony 420tvl flight cam
FatShark Dominators with 5.8GHz Rx
#11 HD Keychain Camera
Cyclops C-OSD with GPS

All Up Weight: 905g inc FPV gear

Notes:
Cow-print wings :D
Slightly lengthened canopy bay area (cut some of the nose off the top) for better access.
"Pod" made out of foamboard.
Using 5v output from Vtx to charge keychain camera via USB cable input
C-OSD is stored underneath flightcam with front-vent for cooling
12V power from 2200mAh lipo powers everything including FPV system via the C-OSD Current Sensor

Had a brief flirt with a 10x6 prop on a 950kv motor and it worked, but the motor was too heavy given the distance it was up in the air, and every time I turned it wanted to fall - it acted as a lever which would attempt to invert the plane :o



So that was that :) Back to 6x4 and high Kv

[3DJIM]

They should be with ya tomoz i spect Steve :), and I soooooo need to see vid of this flying!!

Jim.

[Coyote]

Nice Steve :) You must fit pan to the Fpv cam to get the cow wings in flight ;)

[FPVSteve]

don't have any decent pan servos, using a standard servo sucks as it only has about 90 degrees travel heh

[3DJIM]

You need to be wearing a pair of these too :D

Jim

[g.collins]

And one of my cow shirts.  :laugh:
Looks great Steve.
:) G

[skyscraper]

Is it a bird.. is it a plane?

No its a cow!  :laugh:

regards
Andy