Ezuhf Virgin!!

[fraggle101]

Iv just started my Disco Pro build and im fitting Ezuhf, and im a Ezuhf virgin!  thik iv seen that if i setup ppm i only need a couple of leads plugged into the RX & Naza, is that right? im also looking for a decnt vid or diagram to wire up a lead from the radio to Tx with the power included so i only have the one wire..

Can anyone throw some light on these issues?

Ta muchly..

[friesianflyer]

Hi, I use ezuhf on my models, and have PPm set up on all of them.....

It is really straightforward....

There is a good write-up here

http://www.fpvmanuals.com/2013/07/05/cc3d-and-ezuhf-4-channel-rx/

This is using a 4ch rx, but the process is the same for any of the rxs.......

[fraggle101]

Thanks for that.. I'll have a read up later!..

[DaveyLC]

What radio are you using? Its got to have the 'Futaba' PPM order (or be able to have the order configured) :)

[fraggle101]

DX7s?

[HerkyBird]

You can choose the order of the channels in the ezUHF software for PPM, I'm happily using mine with a JR radio with the channel re-mapping taken care of in the ezUHF.

[Teamftp]

Mine is all set up and running fine on my TBS Pro and Turnigy 9XR.

If you have any problems get in touch, build or the RC set up.

[fraggle101]

Thanks for the offer, I'll give it a go first and see how I get on, don't wanna harass anyone lol..

[DaveyLC]

You can choose the order of the channels in the ezUHF software for PPM, I'm happily using mine with a JR radio with the channel re-mapping taken care of in the ezUHF.

This is true but only on the later 'wide band' firmware but sadly it plays havoc with spectrum TX's :(

[fraggle101]

but sadly it plays havoc with spectrum TX's :(

Really? will it not work at all??

[DaveyLC]

I've been using Spektrum and EzUHF for a couple of years :) never had a glitch that's caused a crash... Ratty has the same setup.. We have both settled on the v1.29 firmware.

The latest firmware caused the EzUHF TX to be a bit more brutal with its frequency hopping which the Spektrum TX doesn't seem to like.

[fraggle101]

so will it be fine with 1.29??

[DaveyLC]

Yep!