Hex question

[JezUK1]

I'm not too sure but recently my hex will spin right no matter how much trim I put into the controller. Is this something to do with a setting on the NAZA?

[marcin]

did you fit props properly CW CCW etc:. ?
is your hexa balnced well.
can you post picture of your hexa ? - that will help

[JezUK1]

As soon as I get home I will post a picture. It's not a very fast rotation its reasonably slow but really irritating when you're trying to hover in one spot.

[Coyote]

That would normally indicate one of the props are loose so the others are generating more yaw in one direction than the other. Your mag should be giving the Naza data to correct this though so maybe a Naza dance is in order

[JezUK1]

Here are the images you asked for.
Will try another dance again. I did try a while ago but didn't fix the issue. Perhaps with another dance it might work lol.

[Coyote]

Make sure your in an open bit of a field no where near metal fences, goal posts etc. No phones, car keys or electrical devices in your pockets, everything on the Hex turned on and your transmitter away from the Hex to do the dance

[zagifly]

Another thing to check is that all of your motors are vertical.

Dave H

[JezUK1]

Thanks guys. This will be one of my jobs over the weekend.

[g4uvz]

Front right hand motor appears to be off line..this would deffinitely cause rotation

[marcin]

Front right hand motor appears to be off line..this would deffinitely cause rotation

agree here.that might be your bad point.

[JezUK1]

Right hand motor appears to be off?