Got my ezUHF! Drivers?

Started by markvanhaze, May 27, 2012, 11:53:43 AM

Previous topic - Next topic
Print
Go Down Pages 1 2
User actions

markvanhaze

#15
May 28, 2012, 06:57:40 PM Last Edit: May 29, 2012, 07:45:36 AM by markvanhaze
Aha! So does that mean for the ESC I actually only need the signal cable? Currently I have ground also attached (plus cable of course is not attached).

Mind you, I also noticed I can just plug the UBEC into the throttle plug of my FY31 - it all powers up nicely, including the ezUHF rx.

Coyote

#16
May 30, 2012, 05:58:28 PM
Yes you only need the signal cable, if you use the -ve cable you introduce a ground loop if you have a current sensor which is very bad.

Yes it will power anything that`s plugged into the FY because the 5v and 0v pins are common inside the FY
Education and schoolin is good, but FPV is gooder :)
Print
Go Up Pages 1 2
User actions