Fatshark Dominator V2 - DVR Test

[mark1975]

no worries Richard if you still want range and wire free grab one of these Ive been to 10km with mine
http://fpvlr.com/shop/index.php?route=product/product&path=83&product_id=81
in spring going to pushing to 15km on the twinstar

[Flyboysee]

Mark / Thunder / Brucey

Have you guys heard about this firmware that is said to improve the DVR recording quality on the V2's...? http://fatshark.helpscoutdocs.com/article/107-10611071domv2-domhd-dvr-fw

My question about this is, in the manual it says that PAL / NTSC are auto selected, yet instructions for this firmware suggests that you must choose one or the other?

Any ideas on whether to do this fw, and whether I'm right in saying it's one or the other?

[mark1975]

tbh Richard from all the past reading ive done the guys over in the us have upgraded there dvr firmware. But all  I did when mine arrived from www.firstpersonview.co.uk was I formatted the sd card in the dvr then was good to go..

[ThunderstruK]

Mark, correct me if I'm wrong, but I think you did a short video with the 1.3 module didn't you?

I'm not expecting the range from the receivers in my ground station, but it will be so nice convenience wise!

[mark1975]

laser bgc vrx
dominator v2 raw testing fpvlr antenna
doms v2 dvr test testing 2x different rxs
various tests etc im a geek lol

[ThunderstruK]

Haha, wow, you did a few then!

[mark1975]

that's just a selection lol

[Flyboysee]

Ah Mark, so you're the guy who's been helping me on YT :) Thanks!

[mark1975]

ha ha iam I only recently changed my youtube name ......

[Brucey]

Hi rich, it is available now, just got mine!

the 1.3 Bruno...? Bloody hell, I know what's gonna happen - only 3 channels, that means 5.8 will be clear at Mad Dogs FFS :)

No the 2.4g module from immersion

[ThunderstruK]

Mark, quick question. Which 1.3 frequency do you find works best bearing in mind we are both affected by that stupid radar station north of Liverpool (can't remember it's name now). I think it transmits at 1250-1350 so I'm tempted by 1360 but I know the antennas are not centred on that.

[Flyboysee]

Mark, quick question. Which 1.3 frequency do you find works best bearing in mind we are both affected by that stupid radar station north of Liverpool (can't remember it's name now). I think it transmits at 1250-1350 so I'm tempted by 1360 but I know the antennas are not centred on that.

Mark / Thunder - are you both using UHF for control btw...? Any effect? I have the EZUHF module on international band...

[mark1975]

using ezuhf 433,mhz on frequency hopping rich..

[mark1975]

Mark, quick question. Which 1.3 frequency do you find works best bearing in mind we are both affected by that stupid radar station north of Liverpool (can't remember it's name now). I think it transmits at 1250-1350 so I'm tempted by 1360 but I know the antennas are not centred on that.

ive been using 1360 recently to get me clear of the radar too only to stop the white lines  works good .

[ThunderstruK]

Cool, thanks Mark. I'll give all channels a go, but I was thinking that channel may be best.

I have only just received my 1.3 module so I don't know how it is affected by uhf, but I will be using the two together so I'll report back. I'm using extreme hopping too.

I had been using uhf with my normal 1.3 receivers and they has no issues with it.