What arrived today?

seebuyfly · March 31, 2015, 11:17:54 PM

Quote from: HerkyBird on March 31, 2015, 07:54:53 PM
4x RCX1306 motors, 4x rctimer/dys 20A esc's and a good supply of 4" props which all came nicely timed together despite coming from different far east suppliers ... all for my microTHuG 180 which I'm hoping to finish building this weekend.

Ordered eight of those ESCs from RCTimer the other day, they look a little bigger than I expected though..

mark1975 · April 01, 2015, 12:07:29 PM

5x otg to mini usb cables for tuning naze at the field with the mobile and for also adjusting the Mobius to the current lighting at the time,all 5 delivered £3.19 cheap as chips

chris-s · April 01, 2015, 12:22:31 PM

Header pins for the Naze32 controllers for our Brucie builds...

marcin · April 01, 2015, 12:47:29 PM

;D

seebuyfly · April 01, 2015, 01:45:39 PM

What's a Brucie build when it's at home?

Marcin where do you get those adhesive switches?

Dave · April 01, 2015, 02:05:50 PM

Cable ties for me today.....lots and lots of cable ties.

chris-s · April 01, 2015, 02:22:05 PM

Quote from: seebuyfly on April 01, 2015, 01:45:39 PM
What's a Brucie build when it's at home?

Bruce Simpson aka RCModelReviews 'Low cost 250 racing quad' build video series, seemed like an excuse to make our first small quads.

...and I think Marcin's switches are actually battery pack markers, red/green for flat/charged.

marcin · April 01, 2015, 02:29:38 PM

oh just got quad esc 4in1 12amp looks OK ,bit heavy so will remove these plates top bottom.

Jake Bullit · April 01, 2015, 03:01:09 PM

Quote from: Dave on April 01, 2015, 02:05:50 PM
Cable ties for me today.....lots and lots of cable ties.

Pervert;)

krikey · April 01, 2015, 07:34:17 PM

1 metre of 10mm dia. carbon fibre. Its for a quad project, but more likely will go with the other bits of project now starting to take up lots of room in the garage.

seebuyfly · April 01, 2015, 07:37:53 PM

Nothing exciting for me today, just a balance lead and Micro JST pigtails

iPeel · April 01, 2015, 08:04:24 PM

A couple of things to carry on with the VTOL project here, the proper contra-rotating 9x6e props and some orange vinyl to cut the decals:

BlueFlyer · April 01, 2015, 09:55:55 PM

Eagle Tree Antenna Tracker :) (and an unrelated replacement laptop charger, since I left mine in Vegas)

chris-s · April 02, 2015, 02:31:16 PM

Nylocs, heat shrink and two zmr250 frames.

krikey · April 02, 2015, 07:55:19 PM

2 x 1300mAh LiPos for my 250 quad. Of course its the bank holiday weekend now so they are about as useful as a chocolate kettle until the other bits arrive. Curse you "bank holiday giver person"