Quad Hut - Birmingham FPV store

[CurryKitten]

Could I suggest you try my hyperwhoop frame?

I don't remember this - did I miss a thread, got a linky ?

[rob.thomson]

I don't remember this - did I miss a thread, got a linky ?

Check here:

STL
http://www.thingiverse.com/thing:2210387

Sample flight
https://youtu.be/BrUg4PRdses

This is a little 1s 8mm brushed quad.

Alternatively if you prefer even smaller.

STL
http://www.thingiverse.com/thing:2202695
VIDEO
https://youtu.be/N5-J6_V_zoE

This is for a little 60mm 1s whoop.

As you can see...   They perform very well.

You are welcome to simple print and vac form your own parts.  Or I can whip one together for you in carbon /nylon filament.   Printed in carbonx,  it is very very durable.

Rob




Sent from my UMI_SUPER using Tapatalk

[CheshireCat]

Hi can you put links to the things you post, like this runcam camera, I went on to your sights and found mini camras, but not this one, it would just make it quicker.
G

Noted and will do in the future! (and ill try and update the previous posts)

Edit: just a thought from this, i think since that update the website has been organised a bit better

[CheshireCat]

Yes, I think so.  I keep meaning to do a brushless micro quad build, but there's a lot out there and I can never decide if I'm going to go ultra low-weight even down to 1s, or I want to stupid thing that's crazy on 3s.  Something that you could realistically fly indoors without killing nearby children and pets whilst having it be able to go mental outside would be cool :)

Still playing around with this microquad, on 2s its almost perfect for indoors (will just blow everything around), outside it feels a bit lacking....but then throw on a 3s pack and its like flying a 5" quad.. very locked in (and maybe more nimble/easier to hit smaller gaps), the only thing ive really done to it is up the rates to the same as my other quads but apart from that it is very good out the box, we are going to be getting a few in which will be without reciever (but we have mini/micro recievers which will save a tiny bit more weight), a possible upgrade would be the camera, it's alright but could be better if you are going to try and fly it outside like a proper quad

[CheshireCat]

We've added some more products to the website section,

1407 motors
TPU battery skid
Carbon Fiber battery protector
silicone anti-vibration motor mounts
f3 brushed board

Will be available by the end of the week, and as always...we have more products on the way :D

[CheshireCat]

Looks like our delivery arrived earlier than planned, previous post updated with some links, 1407 motors are available in cw and ccw, motor mounts are available for 13xx/14xx and 22xx motors

[CheshireCat]

We've got new products arriving soon, check out the coming soon section to keep upto date:

Runcam Swift Micro
Micro quad frames - 70mm, 83mm, 96mm and 110mm
12a 4in1 esc
90mm brushless quad (requires receiver)
more flight controllers
SMA pagoda-2 antenna's
and more :)

[CheshireCat]

Hope everyone is having a great weekend!

New products should be arriving next week :)

Would love to get peoples opinions, We are preparing to move our premises down the road which gives us a little bit more space (we do quads, vape and other little bits and bobs) and we are thinking of setting up a tiny whoop track in the shop, whilst i know not everyone here is local to the area but does it sound of any interest? we wouldnt be looking to charge for use of the track and would look at trying to do some events every so often, just looking for feedback :)

[CheshireCat]

90mm brushless quad now available, comes with 2x 2s batteries...just add RX

Also available omnibus f4 pro v2, 12a 4in1 esc and other bits and bobs, end of the week should see some more micro frames available and a few other products restocked :)

[CheshireCat]

use code fpvuk to get 20% off all orders placed through the website this month

[CheshireCat]

Martian II and Martian III Frames back instock along with xt60 balance boards, VTX's, Pagoda-2's and micro frames 76mm to 110mm

More new stock on the way as always :) going to be getting more accessories in, cable sleeves, capacitors, battery wire, clear esc heatshrink, foam landing pads, dual lock tape, rp-sma and sma extensions, micro fc and esc combo's, dal cyclone props and more :) will be added to the coming soon section so keep an eye out!

[CheshireCat]

We will be moving to a new location over the next week, just down the road from our current shop:

278 Slade Road, Erdington, B23 7LX

Will still be offering the same Vape and quad supplies with the aim to bringing back a few other services and having some fpv sim's and tiny whoop track :)

Why not pop down for a vape/drink/chat/fly :)

[CheshireCat]

We've got a lot of new products on the way, check out https://quadhut.com/coming-soon for an idea of what to come!

Motors, ESC's, Props, Frames, Wires and accessories and more!

We are also now almost fully open at our new location, still need to sort out a tiny whoop track but you are more than welcome to pop down and pickup and purchase :)

[CheshireCat]

Deliveries and new stock are finally starting to arrive more on the way
Some new items include: https://quadhut.com/recently-added

Racerstar 0703, 1103 motor
Racerstar 4in1 4a esc
Foxeer hs1177 v2 camera
Dalrc cyclone props
80mm brushless frames (with prop guards)
X5r frame
Race flight millivolt fc
Matek aio fc
F7 fc


Plus other products restocked

Take a look at www.quadhut.com or come visit our shop

[CheshireCat]

Didnt realize it had been so long since last post!

New products will show up at: https://quadhut.com/recently-added

Some recent new items in which will be going live shortly is the Runcam Split, Runcam Sparrow Micro, Gemfan props and motors and more!

Is there anything you would like to see stocked?