Started a new project, the Mini Talon. Half the size of my X8 so I don't need a launcher :P
Looks good. There are people out there who have managed incredible range with the mini talon. It covers ground pretty quick too!
Yep, hoping for the same results ;D
I wanted one of these I have the big talon pnp with motor and escs still brandnew in box for sale..
As always a hassle to fit everything in side :+
Its a fast great long range FPV plane which is quite small.....really good.....Which probably explains why H King UK don't stock it...
The people that run that Warehouse are so useless...:(
:vulture:
Can't wait to fly it, hearing all this :P
Yes, its a well proven little bird....try watching here....:)
https://www.youtube.com/watch?v=nLqrDrnOrtI (https://www.youtube.com/watch?v=nLqrDrnOrtI)
:vulture:
Going to use a MFD autopilot and I know I can select the mini Talon in the MFD menu, but I can't find how to connect the Vtail servos.....do I just put them in the rudder and elevator AP port and let the MFD AP figure it out??
Yes,
No mixing in TX.
MFD takes care of it,
I have one in my mini talon.
Ignore the CG stickers on the wing, they're wrong, ask me how I know
Also what motor and prop you using?
Thanks TJ!
Setup will be SunnySky 1250 kv and a 9x4.5 prop. For CG I normally use 1/3 of the wingcord measured from the leading edge. Have not checked or looked at the sticker position yet.
Quote from: UAV Aviation on February 09, 2016, 11:59:48 PM
Thanks TJ!
Setup will be SunnySky 1250 kv and a 9x4.5 prop. For CG I normally use 1/3 of the wingcord measured from the leading edge. Have not checked or looked at the sticker position yet.
Same motor/prop as mine
My CG eventually was about 2mm behind the servo wires, the stickers were about an inch in front :o
Ok thanks! I will see were I and up if do the measurement and take into account that the indicated CG is to much forward.
It's been that long since I've flown anything.
I haven't a clue about cg on it.
Servo wires rings a bell though lol
Mini Talon FPV/AP setup. The only thing missing is the Runcam Owl FPV cam and the video switcher.
Getting there...
I've just ordered one of these myself from banggood, so will be watching this with interest!
Time for an update. Talon is almost ready, tested the system setup and it all worked well. It's now time to glue the fuselage parts together.