Mini Talon

[UAV Aviation]

Started a new project, the Mini Talon. Half the size of my X8 so I don't need a launcher  :P

[Billy_boy_2010]

Looks good. There are people out there who have managed incredible range with the mini talon. It covers ground pretty quick too!

[UAV Aviation]

Yep, hoping for the same results  ;D

[mark1975]

I wanted one of these I have the big talon pnp with motor and escs still brandnew in box for sale..

[UAV Aviation]

As always a hassle to fit everything in side  :+

[English Turbines]

Its a fast great long range FPV plane which is quite small.....really good.....Which probably explains why H King UK don't stock it...

The people that run that Warehouse are so useless...:(

:vulture:

[UAV Aviation]

Can't wait to fly it, hearing all this  :P

[English Turbines]

Yes, its a well proven little bird....try watching here....:)

https://www.youtube.com/watch?v=nLqrDrnOrtI

:vulture:

[UAV Aviation]

Going to use a MFD autopilot and I know I can select the mini Talon in the MFD menu, but I can't find how to connect the Vtail servos.....do I just put them in the rudder and elevator AP port and let the MFD AP figure it out??

[_tj_]

Yes,

No mixing in TX.
MFD takes care of it,

I have one in my mini talon.

[bignose13]

Ignore the CG stickers on the wing, they're wrong, ask me how I know
Also what motor and prop you using?

[UAV Aviation]

Thanks TJ!

Setup will be SunnySky 1250 kv and a 9x4.5 prop.  For CG I normally use 1/3 of the wingcord measured from the leading edge. Have not checked or looked at the sticker position yet.

[bignose13]

Thanks TJ!

Setup will be SunnySky 1250 kv and a 9x4.5 prop.  For CG I normally use 1/3 of the wingcord measured from the leading edge. Have not checked or looked at the sticker position yet.

Same motor/prop as mine
My CG  eventually was about 2mm behind the servo wires, the stickers were about an inch in front  :o

[UAV Aviation]

Ok thanks! I will see were I and up if do the measurement and take into account that the indicated CG is to much forward.

[_tj_]

It's been that long since I've flown anything.

I haven't a clue about cg on it.
Servo wires rings a bell though lol