SKEWS FOR £13--Helicals for £20,

[gja2909]

Thanks for the quick PM Simon, just to confirm, did I read here that both tx and rx need to be skews? Or do you recommend a Cloverleaf tx with a skew rx combination?
Gareth

[bignose13]

Hi Gareth 
Nah just keep them skews both end mate
Cheers

[gja2909]

OK Simon thanks, Just sent the money over via paypal.
Thanks

[bignose13]

Thanks mate

[mp66]

Hi Simon,

My 5 turn helical just arrived all packed up nicely.

Thanks  ;D

[bignose13]

Great stuff, get some flying done  :D

[tpawyant]

Hi Simon,

I was referred to you by a member off Phantompilots.com.  I recently purchased a P2 and along with the Quad, I have on the way the Immersion 5.8ghz 600mw vTx and a Black Pearl 7" LCD Monitor. 

I was told that your antennas are the bomb and I should go with your product.  The following items were suggested.  Can you please let me know what cost would be and shipping to the US (Florida)?

Suggestion:  (2) cloverleaf antennas, one for the Immersion and one for the Black Pearl.  (1) helical (5 turn) for the 2nd connection on the Black Pearl.

I am not sure what what exact connection type would be for both the vRX (Black Pearl) and the Immersion vTx.

Thanks for the help.

[bignose13]

Pm'd yer mate

[tpawyant]

Pm'd yer mate

I guess since I just joined, I can not PM you back?  I do not see a reply button.  Can I email you on your paypal email address?

[bignose13]

Yeah email me in the address I gave you mate
Cheers

[TerrorTrooper]

Hi simon.
Wondering if I can order a 5.8 skew and a 5 turn helical (male sma to fit on a diversity receiver.)
I assume it's all right hand polarisation as I have an immersion RC clover on the transmitter?
Thanks.

[bignose13]

Pm'd you mate

[TerrorTrooper]

Thank you simon.
Reply and payment sent.
Cheers mate. :)

[bignose13]

Cheers mate
I'll get on with them ASAP
Cheers

[Chopper Chuck]

Would like to get a price on a Helical 5.8 Ghz antenna for on a Boscam RX-LCD5802 7" Monitor. Will be using the Boscam TS832 600mw Transmitter. Not sure how many turns would give me best reception, so I will leave that up to the expert (you). I live in the US. Troy, MI so please include shipping. I think the connector needs to be SMA (rotating barrel on the outside with a pin in the middle).

Would it be possible to have a post similar to the Skews with a 45 or 90 degree connector on top that the Helical part would connect to? Not sure how this would mount to the monitor so that I can point it in the direction of the Quad (new to FPV).

Thanks for your help and guidance.
Chuck