The K-Quad now available for download from Thingiverse

[Coyote]

5x3's yes, I'll link them when I get back in bud

[Coyote]

I got them from the US : http://www.ebay.co.uk/itm/351063895285?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649

[Coyote]

Interesting findings that carry over to those using BL-Heli flashed Turnigy ESC`s with RCX motors

BLHeli ESC timing issue demo and fix for Cobra, Sunnysky, RCX 2300kv motors

Video includes the fix

[Coyote]

So after having the quad sat there, feeling a bit frustrated not being able to get it into a hover. Nothing to do with the frame at all, it was either the motors or the ESC`s. After many weird programming attempts with the Turnigy ESC`s I found thanks to Wayne (CuryKitten) that my flashing software was at fault.

Gave them a proper flash, took out the KK2.1 which is a good board but I`m a Naza whore so in went a Naza lite.

Fit a new set of props and took it out in the peeing down rain this afternoon

( Ignore the H-Quad cobblers, no idea what I was talking about :) )

K Quad maiden

I`m liking this :)

[krikey]

Great to see it finished Ian, Looking forward to some more videos.

[Coyote]

Cheers Neil, well its finished now, all FPV ready :



I cant find my scales, but weighed it at Keiths, with lipo it was 477g

I have added a Lawmate Vtx - 10g A Mobius camera - 38g WDR - 30g

So should be around the 555g mark

[scalematt]

Is there a v5 of the k quad coming out? If so im on the hunt for one.

[krikey]

There is and when im up and running again with my 3D printer (recently moved) I'll be printing out some.

[scalematt]

Let me know when you get going and i will order one.

[krikey]

The k-quad 5.1 plans are now available for download from thingiverse.

http://www.thingiverse.com/thing:397036

[CurryKitten]

New project needed then ?

[krikey]

Well I do have one that needs finishing...




Its the Skywalker pan tilt mechanism. Perhaps I'll get that underway again.

[iPeel]

That's awesome, cheers!

It looks like there's just one STL that models the complete assembled unit when I open it in netfabb.

Any idea how I get the individual parts to print?

[krikey]

I've uploaded the individual parts, so give it 5 mins and they should appear.

[iPeel]

I've uploaded the individual parts, so give it 5 mins and they should appear.

Great, thanks!