The K-Quad now available for download from Thingiverse

[krikey]

I'm being a bit rubbish with my confirmations. sorry guys.

Robinhood, yours is printing now and will be completed today and I'll get it in the post before the end of the week.

Flypoppa, PMed you (as you know :) )

[Pauluk]

Hey Guys,

Had a power failure on mine which caused a flip and killed one motor.

Luckily i allready ordered some different motors to try:

Turnigy Aerodrive SK3 - 2122-2100kv

http://www.hobbyking.com/hobbyking/s...dProduct=36817

HQ Props 5x3

Battery 1500 mah 3s

She hovers at 40% throttle with the 1500 mah 3s battery

Just out of curiosity i installed a 3700 mah 3s battery and she hovers at 50%.

I'll probably be running a 2200 mah 3s for most of the time.

might try a 2s battery later on 6x3 props.

Paul

[GhostMaster]

Can you PM me? I want to get a frame. :)

[Jeffwhu]

I'm new to this site, how do I send a pm?  :o

[hase2]

I'm new to this site, how do I send a pm?  :o

you need 10 posts before you can write PMs.
Ask krikey if he sends you his email adress

[GhostMaster]

I'm new to this site, how do I send a pm?  :o

I was thinking the same thing...

[CAndrewGreen]

Hey Guys,

Had a power failure on mine which caused a flip and killed one motor.

Luckily i allready ordered some different motors to try:

Turnigy Aerodrive SK3 - 2122-2100kv

http://www.hobbyking.com/hobbyking/s...dProduct=36817

HQ Props 5x3

Battery 1500 mah 3s

She hovers at 40% throttle with the 1500 mah 3s battery

Just out of curiosity i installed a 3700 mah 3s battery and she hovers at 50%.

I'll probably be running a 2200 mah 3s for most of the time.

might try a 2s battery later on 6x3 props.

Paul

Hey Paul,
Any idea what sort of current you're pulling? I'm seeing a max of 11.8A (3S 1000mAh) in free flight and it doesn't have a lot of snap vertically with the little 1811/2000Kv motors, I'm suspicious that the weedy thin wire is the limiting factor......? Like the orange and black colour scheme by the way...
Andrew

[CAndrewGreen]

Hey Neil /Krikey,
I hope you've got lots of ABS for your printer! Looks like it's taking off....
Andrew

[krikey]

So far so good. Thanks to all you early adopters who took a punt. Its really helped out and I hope its giving you loads of fun. If you have any suggestions then please feel free to add them here too.

[Jeffwhu]

Thanks for advice on pm's.
Krikey...."could you please send me your email address because I'm interested in buying one of your frames.
Cheers

[krikey]

Hi
I am also waiting for conformation of my order,just a quick pm would do.
Many Thanks
john

Hi John,

Your K-Quad has been printed and packed ready for despatch tomorrow.

Hope you like it.

Neil

[krikey]

krikey will you perchance be making any in purple? :D

my fav colour  ;)

dizzy :D

The supplier of the filament does these colours in ABS:

Yellow
Green
Red
Blue
Brown (you like landing in mud?)
Gold (blingy)
Black
White
Grey
Orange

so if these colours tickle your fancy then let me know.

[krikey]

Can you PM me? I want to get a frame. :)

PMed GhostMaster :)

[krikey]

Thanks for advice on pm's.
Krikey...."could you please send me your email address because I'm interested in buying one of your frames.
Cheers

PMed Jeffwhu

[GhostMaster]

Can you PM me? I want to get a frame. :)

PMed GhostMaster :)

Thanks, yes i can wait one week, no problem.

Can i mount a NAZA Lite on this guy? Its the only controller i have spare now.  :P

What motors you recommend? Do the RCX 1804 2400KV Work nice on this frame?

Thanks