Modular based Ground Station

[Coyote]

The carbon sheet turned up, so trimmed up what I could



The lid apart from screws and caps is now finished. The frame around the bottom base has trimmed nice, filling in the edges and sanding really paid off for a nice sharp edge finish.

I cut and sunk the DVR bays so the two DVR`s will be inset too.

Now its the waiting game for more of the base plates switches etc, then next week I`ll by buying the guts to go inside it :)

[rob.thomson]

What's the reason for two DVR's?

Sent from my GT-I9300 using Tapatalk

[Coyote]

So I can record both the feeds coming in, or any or both the feeds coming in from another ground station etc

[rob.thomson]

Cool :)

Sent from my GT-I9300 using Tapatalk

[Gundummy]

I might have a solution for the SMA connector covers.... by the bucket load!

I'll let you know  :D

[Coyote]

Slowly coming together now

[Coyote]

I might have a solution for the SMA connector covers.... by the bucket load!

I'll let you know  :D

Cheers bud, I`ve ordered about 100 ( lowest amount I could ) form China so I`ll be sorted, well for a decade or two :)

[Gundummy]

Looking good  :D

[hase2]

looking gooood mate :)

[quadframes]

Slowly coming together now

Looking good M8 a list of parts would be good and links ?

also let me know when its finished and i'll Paypal the postage so you can send it to me  :D :P :P

[Coyote]

Lol thank you kindly Graham, all the parts an link are on page one bud, about half way down the page, the links are the blue writing ;) ;) :) :)

[quadframes]

Lol thank you kindly Graham, all the parts an link are on page one bud, about half way down the page, the links are the blue writing ;) ;) :) :)

No wounder I could not find them  :-[ fancy putting them all the way down there you should know better, they should be in the 1st post  :P

[Coyote]

It wasn`t the first part off the modular system :)

[ClippedWing]

It is missing the massive red power on switch that all ground stations should have...

Bigger the better too!  :P

[Coyote]

Sorry :) I am really fussy, ask Tim, everything has to be colour coordinated :) Even swapping out the receiver LED`s so they are blue not red