What arrived today?

[jono44]

ND filters for my Mavic air then i go and crash it into a tree.

[English Turbines]

 Omnibus F4 Version 3 with SD Card.

This version has a solder pad jumper for either PPM or SBUS.
                                                                                             



                                                                                     :vulture:

[CurryKitten]

I got an Eachine Trashcan (yep, that's it's name) through.  Which is yet another 2s whoop



This one looks and feel very much like the Mobula7 (which isn't a bad thing) although it uses slightly bigger (but less KV) motors, has a VTX capable of going to 200mw and they package it with 2 sets (4 - 2x1s HV in series) of 300mAh lipos (mobula was 250mAh)

I will be attempting to fly it around the house tomorrow

[pk-surfing]

I got an Eachine Trashcan (yep, that's it's name) through.  Which is yet another 2s whoop



This one looks and feel very much like the Mobula7 (which isn't a bad thing) although it uses slightly bigger (but less KV) motors, has a VTX capable of going to 200mw and they package it with 2 sets (4 - 2x1s HV in series) of 300mAh lipos (mobula was 250mAh)

I will be attempting to fly it around the house tomorrow

Hope it doesn't come out better than the Mobula7........ I ordered the Mobula7 after your review and it arrived yesterday, just given it a first run round the room  :)

PK

[CurryKitten]

You should feel safe with the Mobula, it's held up well against other 2s whoops so far.  I think the Trashcan is seeking to copy it rather than do anything different.

But, we'll see :)

[English Turbines]

 800mw VTX from Partom @ 1.3G.

This is before I de-case it, as it weighs a ton....but they work well, with formidable range, just dont put it near any receivers..

9 Channels on a pushbutton with LCD.

     


                                                                                                :vulture:

[Coyote]

Triple Feed Patch Array antenna 5.8GHz 14dBi LHCP & RHCP

[chris-s]

800mw VTX from Partom @ 1.3G.

This is before I de-case it, as it weighs a ton....but they work well, with formidable range, just dont put it near any receivers..

9 Channels on a pushbutton with LCD.

     


                                                                                                :vulture:

What RC link do you plan to use alongside that?

[FPVSteve]

A biiiig long strip of blue hobbyking velcro - cheers for the link Ian :D

[English Turbines]

What RC link do you plan to use alongside that?

EZUHF....It works fine alongside 1280mhz...I already have one doing it....

                        :vulture:

[Coyote]

To accompany the new antenna for the tracker :

[CurryKitten]

I got this little 1s battery charger in for review.  Does 5 at a time, handles lipo and HV and has a bunch of connectors depending on your battery type.  All with a pretty screen.  Looks pretty good for £12 odd, but I'll have a play with it next week (with a slight wave of relief as I don't have to rely on weather to test it :D )

[Coyote]

The video driver board for my old Acer Laptops screen so I can continue on with the build now.



Before I went back out I had to check it actually worked :)

[FPVSteve]

Result!

[FPVSteve]

So Banggood asked me if I'd like something to review and offered me some crappy 2.4GHz F-16s which I declined - they asked me if there was anything else I'd be interested in and I decided to ask for one of these because I quite fancied one when they first came out and it arrived today.

However, given that everyone and their dog has already reviewed one of these, I'm not sure what to do with it. It's a kit version so no stabiliser included, so all bets are off, everything I put in it will be of my own choosing.

Anybody got anything they'd like to see one of these have done to them in the context of a review? Other than that it's just going to get compared to something like my Z-84 (I'm quite interested to find out which one is best actually... I expect it'll be this).