X-UAV Mini Talon

dp106 · July 15, 2016, 10:32:42 AM

Unfortunately I'm not in the red and blue club ???

Sent from my Nexus 5 using Tapatalk

Jake Bullit · July 15, 2016, 11:11:30 AM

No red or blue :o

Looks good Dave.make sure hatch is secure

Dave · July 15, 2016, 11:21:49 AM

I've been thinking about something with wings for a little while.....

Read this thread.....

Got one of these making its way to me as I type ;D

mutley2 · July 15, 2016, 11:40:55 AM

Quote from: dp106 on July 15, 2016, 10:31:06 AM
Nearly ready..

Sent from my Nexus 5 using Tapatalk

Looking good dp, they fly really well, sure you will enjoy it ;D

karlak · July 15, 2016, 12:51:02 PM

Which glue are you guys using to pop the two halves together ? UHU Por, Gorilla ??

jt · July 15, 2016, 01:09:27 PM

Uhu por for me. Stuck together well.

Andy Sayle · July 15, 2016, 01:58:30 PM

I used Por all over, and then a bit of CA in a few locations in place of some tape to hold it in place whilst the glue set properly.. But then, I was building it in a field....

Andy

_tj_ · July 15, 2016, 02:38:42 PM

Uhu for me also.

Once it's set, if I find any gaps that have crept in,
I put some 5 min epoxy into some hot water to make it nice and runny.
Then trickle it into any gaps.

Jake Bullit · July 15, 2016, 03:15:02 PM

UHU Por,five minutes tacky time,then add a bit more to help let the parts slide.

dp106 · July 15, 2016, 04:29:09 PM

What's the consensus on cog location?

Maiden mine at 70mm and it was ok but a bit rough on landing. Thought I would be smart and try it a bit forward of the manual's 76mm. Who knew the manual was right for once!! :D

mutley2 · July 15, 2016, 10:08:57 PM

Quote from: dp106 on July 15, 2016, 04:29:09 PM
What's the consensus on cog location?

Maiden mine at 70mm and it was ok but a bit rough on landing. Thought I would be smart and try it a bit forward of the manual's 76mm. Who knew the manual was right for once!! :D

Mines at 76mm as per factory but could do with coming forward a touch, more flight time will tell :D

_tj_ · July 15, 2016, 11:00:07 PM

Quote from: BlueFlyer on July 15, 2016, 10:26:31 PM
All the bits are here to install MFD TeleFlyPro + GPS into the mini talon so I can track it with my MFD AAT

Might make a start on it tonight, but I'm knackered from a 10k run this morning and a 3 hour tennis match this afternoon

Glutten (spelling) for punishment lol.

dp106 · July 15, 2016, 11:54:42 PM

Meh, I'm embracing my Dad belly :D

Sent from my Nexus 5 using Tapatalk

English Turbines · July 16, 2016, 04:25:26 PM

I have a Dad belly, sort of....but Im allowed due to my age....I am on an Atkins diet again though....works every time...Even without exercise. ..

:vulture:

Jake Bullit · July 16, 2016, 10:26:29 PM

The fleet expands :)