thUndeadMod v3.4 - openLRS S**T just got real :)

[papa_lazerous]

So Serial PPM is working in this version?  I havent tried it but its on my list of things to try as the wiring is allot simpler :)

[Splashy]

A one line change is required #define Serial_PPM_OUT_HIGH PORTB = _BV(4) //Serial PPM out on Servo 8

but i'm sure Thundead will put this in the next release.

It really does make the wiring so much easier. I was not looking forward to adding extra cables to my ZII (and removing the laminate and filler) so am very pleased that it is now working (serial PPM on pin 9 enabled by connecting pins 1 and 3 together with a bind plug).

[papa_lazerous]

Does the RSSI still work ok, also does it have any bad affects on the range?

[Splashy]

RSSI still works fine and is still on pin 8. It cannot have any effect on range since it is only a different method for sending the message from the RX to your OSD of flight controller.

[thundead]

The gods of ASM coding have enlighten me so the fix was born hahahaha :)

A one line change is required #define Serial_PPM_OUT_HIGH PORTB = _BV(4) //Serial PPM out on Servo 8

but i'm sure Thundead will put this in the next release.

It really does make the wiring so much easier. I was not looking forward to adding extra cables to my ZII (and removing the laminate and filler) so am very pleased that it is now working (serial PPM on pin 9 enabled by connecting pins 1 and 3 together with a bind plug).

[SouthPawPaul]

Does anyone know if it's possible to make the Tx buzzer beep every time a packet is lost?

I'm currently FPVing my tricopter with no OSD, so some audible notification that the link is degrading would be helpful (if at all possible).

[papa_lazerous]

Does anyone know if it's possible to make the Tx buzzer beep every time a packet is lost?

I'm currently FPVing my tricopter with no OSD, so some audible notification that the link is degrading would be helpful (if at all possible).

The 'official' software offers this, but be aware you will get poor range on 459.  I would call it un usable unless Melih has implemented some of Thundead's changes in his FW

[phibin]

where can i get a new pigtail for the tx?

i can only fing rp-sma ones and they are all far too long...

simon.

[papa_lazerous]

where can i get a new pigtail for the tx?

i can only fing rp-sma ones and they are all far too long...

simon.

What you need is a ufl to sma connector a quick google search listed plenty that where of usable lengths. and for as little as £3

[phibin]

yep tried that and got a bit over whelmed with it all..

mostly very long rp-sma ones,

just thought some one may know some where good?

back to hunting... lol

simon.

[papa_lazerous]

For the price get the cheapest, then pop down to maplins and buy a standard sma connector (making sure its the correct type as its screw mounted to the module) then you can cut down the over length wire and put your own end on it.  Its your call, search or cut one down :)  I am hoping for the wind to drop down soon so I can go out and fly again, It's looking like Monday is gona be the day for me.  Gona put some more range on my Olrs setup ;)

[papa_lazerous]

Anyone actully flying?  I went out 3.6Km on Monday @970m altitude with flawless performance from this FW.  I really wish someone else would pipe up and say how they are getting on.

[Coyote]

Making my test rig tonight to go and test over the weekend

[ghost2212]

Anyone actully flying?  I went out 3.6Km on Monday @970m altitude with flawless performance from this FW.  I really wish someone else would pipe up and say how they are getting on.

Going flying this weekend so should hopefully get lots of testing in :)

[papa_lazerous]

That's good to know, I've been speaking to Mihai about RSSI as I found mine to be jumpy.  The reason is my OSD displays as a percentage so full RSSI of 3.2v is 100% so 1% fluctuation is 0.032v change and 10% change in RSSI is only 0.32v I was getting mostly 10% changes which only gives me ten steps of resolution so we have spoken about ways to make it better.  I'm hoping with other people speaking about their experiences we can show there is enough interest to warrant more updates.  At the end of the day the RSSI doesn't matter so much as it doesn't affect range but it would be nice to have it perfect.  I intend to find the limit of my range on 459 as soon as the weather is nice :)