AIRBUS 50....A Design by Wayne RC....CAD Plans

[English Turbines]

This model is going to be my next Scratchbuild....Made from 6mm Depron capable of carrying a 5000 Lipo, maybe more.

There is also a Flight Video on Waynes channel and this Plan is on here to help others who may wish to build one.






:vulture:

[dp106]

Have you got anywhere with building yours yet?

Sent from my Nexus 5 using Tapatalk

[English Turbines]

Have you got anywhere with building yours yet?

Sent from my Nexus 5 using Tapatalk

Its next up, after I finish my current build m8.....Its easy enough to build and I think my Plan of Waynes original is a little smaller than his, certainly my Fin is not as tall.....
   Not absolutely sure about the C of G, but Deltas are more forgiving than say your typical foamy flying wing.....My wings (base layer) will not have a centre join like Waynes did....

:vulture:

[Vortecks]

Its next up, after I finish my current build m8.....Its easy enough to build and I think my Plan of Waynes original is a little smaller than his, certainly my Fin is not as tall.....
   Not absolutely sure about the C of G, but Deltas are more forgiving than say your typical foamy flying wing.....My wings (base layer) will not have a centre join like Waynes did....

:vulture:

Did you ever build this one mate?
I've got this big box of 6mm depron that I'm itching to use!  :D

[English Turbines]

 Hi Tony,

I didn't get around to it yet m8, this is my interpretation of Waynes original Design though.....The drawing is to scale and the dimensions shown in CAD. My version is lightly smaller than his.

  You can visit Wayne RCs channel for the original sizes if you like....and see his flying as well.....:)  Im still going to build one at some point...

    :vulture:

[Vortecks]

I've watched Wayne's video quite a few times now. I really need to build something, my creative mind is going mental!

I might have a go at building a depron MTD. There's no plans and the only things I've got are photos from the net and the wingspan  :laugh:

[dp106]

You could try a flying wing to start with depending on whether you've built anything before? Really simple to build with a kfm aerofoil

Sent from my SM-G920F using Tapatalk

[English Turbines]

I've watched Wayne's video quite a few times now. I really need to build something, my creative mind is going mental!

I might have a go at building a depron MTD. There's no plans and the only things I've got are photos from the net and the wingspan  :laugh:

  Unlike your usual Flying wing, this one wont nod all over the sky and is very point and shoot....Its stupid easy to build as well.

  :vulture:

[Vortecks]

I built a 2m delta wing from depron in 2004 which took 3 months and flew once. I soon found out that my LOS skills really are bad  :laugh:
Whilst it was in the air (20 seconds), it flew perfectly and I've always wanted to build another one but I want it solely for FPV.
If Wayne's design will scale up and fly just as good, I might try a 1600mm build.

[English Turbines]

I built a 2m delta wing from depron in 2004 which took 3 months and flew once. I soon found out that my LOS skills really are bad  :laugh:
Whilst it was in the air (20 seconds), it flew perfectly and I've always wanted to build another one but I want it solely for FPV.
If Wayne's design will scale up and fly just as good, I might try a 1600mm build.

Hi Tony, yes, a Delta is always pretty predictable, not sure why you want to make it bigger though...?.....I think it will take a 4S 8000mah at a push as it is....It has a fair old bit of wing area....?

    :vulture:

[Vortecks]

I've spent a week, looking for something else to build and I can't find anything else that I won't lose interest in.
This weekend's video is gonna be the start build of Wayne's masterpiece.
I'm using all the parts that I've already got so it's gonna be a bit heavy, especially with an MFD, Tiger 2814 and a 5000mah 4s in it.
Of course, you know my style..... I always kit it out fully when I build it instead of test flying it first.

Wish me luck  :D

[English Turbines]

I've spent a week, looking for something else to build and I can't find anything else that I won't lose interest in.
This weekend's video is gonna be the start build of Wayne's masterpiece.
I'm using all the parts that I've already got so it's gonna be a bit heavy, especially with an MFD, Tiger 2814 and a 5000mah 4s in it.
Of course, you know my style..... I always kit it out fully when I build it instead of test flying it first.

Wish me luck  :D

  Hi Tony,

              Great, I shall look forward to seeing your Scratch Masterpiece then m8....You do know you dont have to put a heavy 5000ma Lipo in it from the get go...?..you could start with something lighter because the long FUZ will let you do it.
  Unlike some wings I can think of.....LOL.  Its why I like it...its more flexible...and it has a FUZ to lob it with..!!!!

              Dave...:)

     :vulture:

[Vortecks]

In case anyone else is itching to build something.......

(Sorry about the picture thing, it's what YouTube chose at random)  :P