Right! I need help and i need it now!

[gibbo1974]

Sorry, should have said please lol

Guys and girls.

I have recently bought a 1.2ghz tx and rx from ebay amd i can't figure out how to get it all to wire up.

Item number 252806164173

I have a runcam eagle camera and atitude goggles. I don't mind having a lead to my goggles so can anyone help me with getting it all powered up and plugged in?

I am getting desperate.

Fanx

[SnoozeDoggyDog]

First off the vtx will be 12v, your eagle will accept 12v so you're ok there.

Lay it out on the bench to get it running, it's easier than fannying about trying to test it all in a plane.

In principle with the video going via an FC the yellow from the runcam needs to go into the yellow of the 1.2 vtx. Your love and ground 12v can go directly into the live and gnd of your 1.2 vtx and Runcam.

Make sure your vrx (which is also 12v)  is on the same channel as the vtx.

Make sure you have an antenna on your vtx before you power it on or you'll burn it out

Are you running an FC with osd?

[BigT]

Here you go, from the master https://youtu.be/oOmld34AOas


Sent from my iPad using Tapatalk