thUndeadMod v3.4 - openLRS S**T just got real :)

[Splashy]

Yup, found the culprit... Will move RSSI on pin 1 and re-arrange all the ports like this:

R 1 2 3 4 5 6 7 8. bed time now though lol.

Cheers webe for pointing out this nasty bug.

Mihai Out :D

anyway Think I found out what;s wrong with the RSSI....  the PWM is messed up because the fw uses timer1 to drove the servos... so need to find a way round this.

Just wanted to check that you are aware that if you use PPM you have to connect pins 1 and 3 (like using a bind plug). If you are planning on putting RSSI on pin 1 then would this mess up the PPM output mode?

[thundead]

RSSI is now fixed. All I need is to move the Serial PPM thingy and we're good :D ETA 30 mins.

[thundead]

u guys want the same jumper thingy idea for the Serial PPM ? or should I make it activate via 2 pins that are close together (2 & 3) vs (2 & 4) ???

[Coyote]

I`m easy, 2&4 sound good to me

[thundead]

2 and 4 will be then :D

I`m easy, 2&4 sound good to me

[thundead]

right I'll make that one clear in the readme lol

Guess what that will be my fault again......had 3.3v selected in arduino and not the 5v one

THANK YOU PAPA!!!!!

I made the same mistake,just ask Mihai..... :laugh:

[thundead]

Teaser as usual :D
Thundeadmod 3.5 rssi test.

[papa_lazerous]

Laughing at the random guest appearance at the end :) lol looks like RSSI is good again :) I'll have some range confidence this weekend now

[Cat695]

right I'll make that one clear in the readme lol

Guess what that will be my fault again......had 3.3v selected in arduino and not the 5v one

THANK YOU PAPA!!!!!

I made the same mistake,just ask Mihai..... :laugh:

Even after being told use 5v earlier I just kept seeing 3.3v on the board and just selected that.....so my bad but good for newbies to know

[Cat695]

Another question

Am I right in saying that if I set up a mix (like aileron/rudder) they don't work???

[Coyote]

Yes they work, the mixing is done in the radio and the radio sends out each channels mixed output

[Cat695]

Yes they work, the mixing is done in the radio and the radio sends out each channels mixed output

Yep they do, I had pulled a cable out when messing about with positioning.

[thundead]

thUndeadMod 3.5 now live

http://code.google.com/p/openlrs/downloads/list

IMPORTANT UPDATE FOR ANYONE USING MY FW.

   Changelog
   V2 Rx remapped
   Fixed RSSI bug in v2 hardware
   Added Hardware Help in configurator

[papa_lazerous]

I'm going flying tomorrow with working rssi :)

[Coyote]

Me too :) Just tried it out, working great :)